Downshifted from 4th to 3rd and both gears went "soft" like they weren't even there. All other gears work. It smelled this morning and I've noticed that it's gotten "clunky" when I shift over the past couple months. Also, the shift indicator light has been coming on when I'm in 5th when I don't need to shift. All seems related now.
SOURCE: 02 jeep liberty won't shift into 3rd or 4th gear.
Ratio codes generally indicate a pressure loss & slipping which the computer reads as a gear ratio problem. Likely you need a rebuild.
SOURCE: transmission wont shift until about 4000rpms from 1st to 2nd gea
Have a code check done and see if speed sensor or controller is working properly. if bought from a dealer, get it back there asap...they can't sell it in that condition!!...No test drive before you ploped down your money?
SOURCE: GEAR SHIFTING CAMRY 2004 2.4 XLI
Hi,
This might be because of the gear box problem. By any chance, did your car face flooding? In such cases, please drain the gear box and replace it with new gear fluids. Also, check if you go in low speeds, you might be able to engage it with ease. Please come back to me if you feel this doesnt solve your issue.
Regards,
Hari
SOURCE: I had a mechanic come
I don't know how you thought he could fix that leak when the trans has to come out? Take it to a transmission shop and stop guessing, and replacing perfectly good parts. Have the trans shop replace the rear seal while the trans is out.
221 views
Usually answered in minutes!
×