Question about Cars & Trucks
Catalytic converter is clogged basically its stopping up your exhaust. Over time the pressure will slowly vent out, allowing your car to start, only to build up the backpressure again, stalling engine.
Posted on Dec 10, 2013
hello I',m an M.B. tech. These becker radios can be difficult if the wrong code is entered( i believe 3 times ina row) and go into security lock. if you enter code and it does not work remove radio and get serial number of and call dealer. The way you enter 4 digit code is by entering the number with the station program keys on the top of the face plate . then after code is entered you press the * symbol and it should start working. There is a becker web site that can also assist you with radio problems it is www.beckerautosound.com . good luck
Posted on May 26, 2009
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.
Posted on Nov 17, 2009
Testimonial: "thanks for the prompt reply"
Tips for a great answer:
Dec 27, 2013 | 1989 Mercedes-Benz Mercedes Benz 500 Class
Dec 25, 2013 | Cars & Trucks
Dec 21, 2013 | Cars & Trucks
Dec 10, 2013 | Cars & Trucks
Jan 22, 2018 | Mercedes-Benz Cars & Trucks
Mar 17, 2010 | 1989 Mercedes-Benz Mercedes Benz 500 Class
Dec 21, 2009 | 1992 Mercedes-Benz Mercedes Benz 300 Class
Apr 28, 2009 | Mercedes-Benz 560-Series Cars & Trucks
267 people viewed this question
Usually answered in minutes!