SOURCE: Peugeot Partner Van 51 Plate
HI,AS IT IS HARD TO START THESE EXTRA COLD MORNINGS WE ARE GETTING,TRY A SET OF GLOW PLUGS, YOU CAN SEE THEM ACROSS THE FRONT OF THE CYLINDER HEAD,WITH A WIRE JOINING THEM UP,YOU WILL NEED A 8mm SCOKET , FOR THE WIRE, AND A DEEP 12mm ONE FOR THE PLUGS,UNSCREW TO THE LEFT,AND PUT A BIT OF GREASE ON THE THREAD OF THE NEW ONES AS THEY CROSS TREAD EASY,ABOUT 17POUNDS FOR A SET,THANKS.
SOURCE: Peugeot Partner Fuel Pump Problem.
If that connection is leaking, then that is more than likely the problem. If fuel is leaking out, then air will leak in. When the van is left overnight, the fuel will run back down the fuel line to the tank, leaving air in the pipe. The fuel system must be completely air tight. Try slapping some grease around the connection and see if it starts in the morning. if it does then replace the connector and you have fixed the problem.
TL
SOURCE: cannot take casing off front side light bulb
I want to change the side-light bulb on my Citroen Picasso off side front. I can get the near side one off, but find it difficult to turn the bulb holder inserted in the head light lens. Should I use some outside help like a HAMMER? Pete
SOURCE: How to replace Peugeot 206 side light bulb
hi mate you have to twist the bulb holder through 90 degrees to remove it, you might get better access if you remove the screen washer filler neck
241 views
Usually answered in minutes!
×