SOURCE: 2004 chrysler pacifica
It is for an oil change mainly and any other service your maintenance manual suggests at the mileage interval. It needs to be reset after each oil change to be accurate.
SOURCE: 2007 Chrysler Pacifica won't go in reverse
I am having the same problem, I just wanted to know if you found out what it was. If you have would you please let me know. [email protected]
Thank you!
SOURCE: 2005 Chrysler Pacifica transmission won't engage.
can you hear anything engageing when you put it in gear?
SOURCE: 2004 chrysler pacifica service tire system light
Make sure that your tire pressure sensors were not damaged. one simple way to check what tire sensor is causing the problem is to lower each tire individually and check to see if the message displays to a different tire or more than 1, depending on the TPM system your pacifica has. Chrysler has a TPM (tire pressure monitor) tester which can check each individual sensor for correct operation. and the sensor's batteries have typically a 5-7 year life span.
SOURCE: 2005 chrysler pacifica will not
First thing to do is check trans fluid to see if it is low-warm the engine up, and place the gear selector in drive/reverse a few times, then while the engine is idling, check level-if it is low, fill with trans fluid to the correct level and try it (use the correct fluid designated for a Chrysler). If this is not the cause, you have an issue either with the trans cable or it's attachment or an internal problem that will require dropping the trans pan to check solenoids, or possible internal trans damage.
308 views
Usually answered in minutes!
×