Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Dec 06, 2013

Mazda 3 key fob battery replacement - 3 Mazda Cars & Trucks

5 Related Answers

Anonymous

  • 365 Answers
  • Posted on Jun 14, 2009

SOURCE: mazda 3 yr 2004

Fords "better idea"...go to an automotive stereo shop that does keyless entry install for around $89...it's the cheapest way to go anyway. Dealer will have to reprogram the FOB, you're looking at $100+

Ad

Anonymous

  • 9 Answers
  • Posted on Jul 11, 2009

SOURCE: key fob not working after changng battery

Bring it to a "Batteries Plus" type store; they can repair the fob if it is ony a broken battery clip. They did it for me for free! IF it is not the fob, then bring it to a dealer??

Anonymous

  • 495 Answers
  • Posted on Nov 22, 2009

SOURCE: 2002 Mazda Tribute rear liftgate lock replacement

I'm not sure where' the screws are but basically You need to remove the panel on the rear door, then once the panel (interior trim) has been removed you should see a lock mechanism which will be screwed/bolted in place. Easier and cheaper then buying a brand new lock mechanism (unless you want to buy brand new) is going to a wreckers and finding your car model and get it that way (yes it's used but it'll probably save you tons of money vs the dealership) Best Regards.

Anonymous

  • 376 Answers
  • Posted on Dec 31, 2010

SOURCE: Neither key fob for our

all you have to do to reset the coding is hold the lock button down for a minute or two till the locks click locked. then test it again by unlocking them. if the button light flashes rapidly then the batt is low, which will affect the distance for use. (do the re-code right next to the vehicle for best results.)

adadoug

Doug Adams

  • 682 Answers
  • Posted on Jan 05, 2012

SOURCE: 2008 Mazda 5 key fob battery changed and it still won't work. how do i fix it?

I have taken a GM key FOB apart before and found a bad soldered connection. If that doesn't work, people sell them on Ebay all the time, look up how to program on the web and reprogram it to match your vehicle.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2012 Mazda 6 I lost the fob key and battery went dead so replaced battery now alarm won't let me start my car...have another key but no fob how do I shut off alarm so I can start my car

You will probably need to replace the fob as that will contain the code to turn off the alarm and immobiliser. You might have to go to a dealership if it is a factory fitted security system.
0helpful
2answers

How do I replace the battery on a key remote for a Mazda cx9 year 2012

Flip open key. With small tweezers, file, or jewellers screwdriver, depress release button found in key-slot (near the end of the fob with the key on it. Pull two halves of fob apart. Separate the remaining fob in half again (the part without the key) by prying in the slot on the open end. Replace battery. Reassemble.
0helpful
1answer

How to open 2008 mazda key fob

Remove the key ring and then it just pops open from the top.
0helpful
1answer

Mazda mx3 japanese import 94 reg key fob died, i changed the battery but it will not now unlock the car, the doors are deadlocked so the key wont unlock the doors either, can i re-sync it from outside? Or...

Whether your key fob is damaged or just has a dying battery, there is a way for you to unlock your vehicle and start the car. Just follow the steps below:
  1. Press and hold the auxiliary key release button on the underside of the key fob.
  2. Grab the looped end at the top of your key fob.
  3. Pull out the auxiliary key.
  4. Use the auxiliary key to unlock the driver's side door.
[Read more: What to do when you're locked out of your car]

HOW TO START THE MAZDA 3 WITH A BROKEN OR DEAD KEY

Now that you've managed to enter the vehicle with the auxiliary key, you're going to need to know how to start your Mazda 3. At this point, the auxiliary key can be put back into the key fob, as the key fob can still be used to start your vehicle. This will only take a few extra steps.
  1. Make sure the shifter is in the Park (P) or Neutral (N) position.
  2. Depress the brake pedal.
  3. The light on the engine start button should flash green.
  4. Take your key fob and touch the back of it to the push button start.
  5. When the green light on the engine start button stops flashing and remains continuously illuminated, press the push button start normally to start the engine.
  6. It is recommended you allow the vehicle to idle for about 10 seconds.
0helpful
1answer

What caused my '05 mazda 6 key fobs to stop working

Loss of programming maybe or a faulty keyless entry module.
27helpful
2answers

How to change key fob battery in 2010 mazda cx 9?

I just figured out how to change the battery in the Advanced (keyless) fob for my 2010 Mazda CX9. You just need to take out the physical key, and use a small flat-head screwdriver to pop off the back cover. Then there is a black battery cover with an o-ring that just pulls up to reveal the CR-2032 Battery. Here are some pictures to explain better:10_10_2012_2_13_28_pm.jpg
0helpful
1answer

Mazda 2 key fob battery replaced but still not working

If the battery has been replaced then there is a chance that the contacts for the buttons themselves could be dirty/rusted. Have them checked and cleaned.
0helpful
1answer

How do i change the battery in the key fob?

some key fobs are not able to be taken apart to replace the battery, if yours is one of these types you will have to go to the mazda dealer & get a new key fob.....hope this helps.....cheers.
1helpful
1answer

Can you replace the battery in an RX8 keyfob? If so how do you open the FOB. I've managed to seperate the key from the alarm but I can see no obvious place to get to the battery.

Assuming you're talking of the key fob, separate to the key (earlier version), then my Owners Manual, page 3-5 describes...

"1. Insert a small screwdriver into the slot and gently pry open the transmitter."

(refers to a slot on the side of the fob where the keyring is held)

Replacement is a CR2025


2helpful
1answer

Need programming instructions for RKE for 2000 Mazda 626

2000 Mazda 626
Note: Make SURE the battery is new.
Instructions for programming ONE keyless remote fob.
1. Open the driver’s door & leave open.
2. Insert the key in the ignition.
3. Turn the key to the on and off position 3 times.
4. Remove the key from the ignition.
5. After door open chime stops, press the door open button 3 times.
6. After chime, press any fob key twice.
7. After second chime, press any fob key twice again.
8. After third chime, press any fob key twice again.
9. Press the door open button once.
10. The car should give another acknowledgement chime.
11. Test key fob.
This DOES work. I just programmed mine successfully today, three hours ago.
Not finding what you are looking for?

299 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...