Question about 1999 Volkswagen New Jetta

How to change door handle 95 vw jetta vr6 - 1999 Volkswagen New Jetta

2 Answers

Zagoni Attila

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.
Contributor
30 Answers

95' jetta? You mean Vento? I knew that jetta was untill '91 (A2) then after '99. If Jetta A2 (with the common known external door handle issue, same as on golf, polo mk1, mk2 )
External handle:
Remove the chrome/plastic trim from the middle of the handle, you will find a screw there. Also, on the opened door, above the lock mechanism you will find another, bigger screw. unscrew both of them end pull out the handle.

Internal handle: Remove plastic trim from the middle, in the two end are 2 screws, unscrew-it and the handle comes off

Posted on Jan 13, 2014

MechanicDrew

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.
Contributor
39 Answers

Outer or inner door handle?

Posted on Jan 05, 2014

3 Related Answers

Anonymous

5 Answers

SOURCE: 1994 vw jetta drivers door window crank inside handle removal(man

You'll see a small ring on the inside of the crank where it meets the panel. That ring holds the crank in place. To remove the handle simple push the ring up and the handle will slide right off. Depending on the position of the crank the ring might have to be pushed up down or sideways. Hope that helps.

Posted on Feb 08, 2009

Chris Almeida

31 Answers

SOURCE: 1999 vw jetta vr6 abs light stays on, but brakes work fine

the only way you will find this out is to have a diagnostic machine plugged in and the fault memory read to check what fault is logged, it could be anything from a ABS wheel speed sensor to a control module fault, to save money in the long run i would advise you get the fault memory read first. hope this helps

Posted on Jul 29, 2009

Patrick Rayome

1757 Answers

SOURCE: 2001 vw jetta vr6 need the firing order and

For the 2.8L DOHC V-6:
Firing Order:
1-5-3-6-2-4
Cylinders:
......(back).......
|.1....3....5....|
|....2....4....6.|
Ignition Coil Connections
(back)
|.2..5.|
|.4..3.|
|.6..1.|
(front)

Let me know if this helped, or if you have additional information of questions. Feel Free to contact me at FixYa.com!

Posted on May 07, 2010

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

2 Answers

Can you put the seats and door panels from a 01 vw vr6 into a 97 vw jetta gl?

Every time I want to know what is interchangeable, I just call my local wrecking yard and ask them. They have a computer program that has all of that on there.

Apr 17, 2015 | Volkswagen Cars & Trucks

1 Answer

95 vw Jetta vr6 shifter won't go into gear

GO UNDER CAR ON TRANSMISSION LOOK FOR A PLUG PULL IT OUT STICK YOUR PINKIE FINGER IN THE HOLE IF NO GEAR OIL ON THERE THEN GET GEAR OIL NOT TRANSMISION FLUID AS STICK SHIFTS USE GEAR OIL JUST PUT IN THAT HOLE TILL OVER FLOW PLUG IT BACK UP THEN GO FROM NUTRAL TO HIGH GEAR WHILE CAR IS NOT ON HOP THIS HELP IF NOT IT COULD BE CLUTCH BEARING IS SHOT THATS NOT A DO IT YOUR SELF PROBLEM UNLESS YOU OWN A GARAGE LOL

Jun 05, 2013 | Cars & Trucks

1 Answer

I'm trying to buy a good vw jetta, I found one

Most VW are interferance motors. That would mean the pistons could have hit some valves. I would stay away.
Also have you seen the motor? I may be off but I thought the VR6's had a chain. Even if, its still an interfernce motor.

Oct 07, 2011 | 2000 Volkswagen Jetta TDI

2 Answers