Question about 1996 Audi A6
My name is Carl. Car (Audi) sat for a year. Always ran fine. Fuel pump is working addition fuel from starting fluid makes no difference. There is no spark from any of the three coils. Checked all known fuses. Are there any that feed the coil that may be under the carpet or elsewhere? Any fusible links? Battery is good and cranks engine at normal speed. There is a code of p0322 and no registrable crank RPM on scanner. I do not have a VAG unit just an "old red brick" from snap-on running a generic test as I have no specific info for German vehicles. Thank you
Could be the distributor speed sensor which tells the coils when to fire.
Posted on Dec 02, 2013
Have you tried replacing the starter? I know starters can go bad if the car is not started or run for a long time.
I am getting the same car, with the same issue.. it sat for 2 yrs and won't start.
My mechanic told me it is probably a starter.
Posted on Mar 31, 2009
SOURCE: I have an audi 500sel
We will star a list of what is good.and what controls spark
1. crank sensor .you done it
2.ignition control module. located on the center of bulkhead,behind intake air hose
3.coils. you tested it.
4.ECM located under passenger side foot well
ECM no you got fuel,so lets leave it out
cranksensor okay you replaced it
ICM ignition control moduel.
no spark you cover everthing. has to be a loose or no contact connection somewhere, you covered it all.you might want to tap on the ecm., or check the fuse for power to junction the ones in the hood area those can blow and not give power to ignition system
Posted on Apr 28, 2011
Tips for a great answer:
Apr 14, 2018 | Lincoln Cars & Trucks
Mar 01, 2016 | Subaru Cars & Trucks
Mar 21, 2014 | Audi A4 Cars & Trucks
Dec 16, 2013 | Dodge Ram 2500 Cars & Trucks
Feb 10, 2013 | 1999 Ford Windstar
Feb 24, 2018 | 2000 Audi TT
Jun 23, 2011 | Mitsubishi Eclipse Cars & Trucks
Mar 16, 2009 | 1995 Audi 90
Feb 06, 2009 | 1998 Jaguar XJ8L
Oct 26, 2008 | 2000 Mazda MX-5 Miata
187 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: