Question about Peugeot 206

1 Answer

Hi I have a 1999 peugeot 206. The car will drive normally then it will rev quite high. I then take my foot off the accelerator pedal and put in the clutch and the throttle stays open. I've checked the throttle cable and it seems to be fine, the cable retaining clip is operating fine? Any suggestions? Is it an expensive fix?

Posted by Billy waters on

Ad

1 Answer

Rigger DeBusk

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Peugeot Master
  • 1,811 Answers

Check that the throttle return spring is in tact. If not connected or broken, replace it.

Posted on Nov 27, 2017

Ad

5 Related Answers

Anonymous

  • 4 Answers

SOURCE: Peugeot 206 1999 losing power

its a peugeot, the french are known for many things autos arnt one of them

Posted on Sep 29, 2008

Ad
alicantecoli

Colin Stickland

  • 22485 Answers

SOURCE: need instructions on how to fit auto adjusting peugeot 206

cant honestly say i have fitted one on this model,but is it full auto or is their an adjuster on the back of the clutch pedal.??? look first.Ford escort one is a bit of a pig but easy when you have the knack same as a golf easy when you know how .Now golf cable comes with two plastic ties that hold auto adjuster together and you dont relaese them till the cable is fitted.Can you describe the set up then i might be able to help some more.American web site so a lot of models not listed here and the lingo take a bit as well ,i mean whos ever heard of pigs tails or fire wires.Well what else can you expect when they are not taught the queens english and dont drink tea, just waste it by throwing it in the sea.

Posted on Mar 05, 2009

TDISLine

TDISLine

  • 1874 Answers

SOURCE: hi i have a peugeot 406 2.0 hdi 1999, when i get

The clutch acting system is hydraulical, (clutch hydraulic system).
Your clutch pedal master cylinder is weak, and needs to be replaced or repaired by gasket kit replacement. Also the clutch slave cylinder can be used, and needs to be repaired (by gasket kit replacement), or replaced. The clutch system must be bled after carrying out work on the hydraulic clutch mechanism.

Posted on Dec 09, 2009

mike hayward

  • 279 Answers

SOURCE: Peugeot 205 1.2 Junior, Slipping Clutch

see if thete is any adjustment left in the clutch cable if not then you will require a new clutch

Posted on Dec 10, 2009

Anonymous

  • 1 Answer

SOURCE: FORD FIESTA MK5 CLUTCH CABLE TO PEDAL CONNECTION.

http://www.rac.co.uk/forum/showthread.php?t=5929&goto=nextoldest

Posted on Feb 01, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Peugeot 4007, 2011 2.2 diesel. Have fault code P2128. Engine missing when accelerator just beginning to be depressed. Any clues if the two are related?


your fault code is for Accelerator pedal position sensor/switch E high input. Your vehicle has a drive by wire throttle setup which means there is a wiring loom instead of a cable from the pedal to the engine and the pedal sensor is there to provide the engine ecu with the info of how much acceleration the driver is applying with his foot

Apr 16, 2016 | Cars & Trucks

1 Answer

Peugeot 206 stalling, either cuts off or I floor the gas pedal


When you "floor the gas pedal" the computor goes into a bypass mode (emergency mode). This honestly sounds a lot like a problem I ran into a while back on a Dodge truck. Problem was a cracked intake manifold (plastic). Short version: vacuum leak.

Dec 11, 2013 | 2001 Peugeot 206

1 Answer

Peugeot 206 XS Can't accelerate above 1000 rpm at any gear


The very first thing you need to do here is have the engine control module scanned for fault codes with an OBD2 fault code reader or scan tool. Once you have the fault codes then you can diagnose the cause by the fault code or codes received.

Mar 30, 2017 | 2003 Peugeot 206

2 Answers

I have replaced idle control valve and car is still over revving,its a 1999 peugeot 206 1.1, mostly sits at 3000rpm but is quite erratic, help plz


Check the fuel pressure regulator for to much pressure.Pull the vacuum hose off the map sensor and if fuel runs out then replace the regulator.

Oct 13, 2012 | 1999 Peugeot 206

2 Answers

Peugeot 206 1.4 hdi wont rev up sometimes it will and sometimes it wont


Is the check engine light on all the time or it is it off?

I know same problem happening in another Peugeot was told he has a tubro problem but his check engine light is on all the time but accidentally it goes off sometimes for few days.

Do you see alot of heat/air or smoke coming out when you open the oil chamber?

Probably oil leakage going to a sensor?

Anything to do with the pistons seals?

Jul 13, 2012 | Peugeot Cars & Trucks

1 Answer

Bout a week after getting my 2009 crv i noticed every time i let off the accelerator the car will appear to downshift sometimes it is quite a rough downshift it has done this for the last 8 months. Dealeri...


the car is fitted with a fuzzy logic gearbox,computer controlled within the engine management system.it will try to make you drive as economically as possible taking into account the gas pedal possition/road speed and load.it will also adapt to your driving skills.
so if you drive in town all the time it will change at higher revs and out of town, if you accelerate gently,lower down the rev range.Try this.without using the gas pedal put the car in drive and let the car do the work,it will accelerate on its own upto 4th gear.
then try again, from stop, keeping your foot about 1/3rd down on the gas and let the car do the work try not to move your foot.then, if you can, drive using only a max of 1/3rd gas pedal all the time and you will find within 100 miles the car has adapted to this and your gas mileage will go thru the roof. also the car will adapt to high grade gas.adjusting engine output to match.

Mar 12, 2010 | 2002 Volkswagen Jetta TDI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

xxxxxx xxx

Level 3 Expert

5023 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6486 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...