Question about 2005 Acura MDX

1 Answer

2005 acura mdx tailgate light not working . i tested the two bulbs and they are fine. the bulb socket has no juice. the owners manual does not tell you the fuse for this light.i tried fuse #10& #11 on passenger side fuse box and they are both fine, but i was just taking a guess. i need help locatingh the fuse. thanks for any help on this matter

Posted by seymourcheve on

Ad

1 Answer

loginek

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Acura Master
  • 1,023 Answers

On this website (link below) you find fuse box diagram and description for Acura MDX (2005)

Acura MDX 2005 2006 fuse box diagram Auto Genius

Posted on May 28, 2017

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: How to use TPMS in Acura MDX 2005

The TPMS light will be visible in your instrument panel like your parking brake would if activated. The TPMS function is activated automatically once any of your tires are improperly inflated. Furthermore, it will identify which tire needs attention.

Posted on Mar 14, 2009

Ad

kirtec auto

  • 1348 Answers

SOURCE: acura mdx 2005

30000 miles.the owners manual will tell you exactly.most honda are 48000 km,exception is the cvt type transmission which there is no service done.

Posted on May 26, 2009

co7196

Ned C Cook

  • 3433 Answers

SOURCE: 2006 Acura MDX bluetooth stopped

Bluetooths have batteries, Rechargeable. If it won't hold a charge replace the batt.

Posted on Oct 16, 2009

Anonymous

  • 1 Answer

SOURCE: 2004 Acura MDX Water Leak

The 2002 MDX I worked on turned out to be a drainage problem . Seems the factory installed foam in the bottom of the hinge pillar post which blocked the drain holes . Take off the mud flap , remove enough of the splash shield to access the bottom of the hinge pillar and drill a half inch hole at the front lower corner aiming the drill slightly upward ( be sure to protect the bare metal) .Water gushed out when I did this. For extra ins. remove the kick panels and check for two holes a few inchs from the floor, plug and chaulk these holes. Hope this worksfor you too

Posted on Jan 07, 2010

Anonymous

  • 1 Answer

SOURCE: low beam light bulb issue rsx type s acura 05-06

The three prong base is just the bulb holder.

Here is an excellent tutorial on how to change the build:
http://forums.clubrsx.com/showthread.php?t=303640&highlight=change+bulb

Posted on Jan 24, 2010

Testimonial: "Thanks,i went to the Acura dealer and bought the missing sockets!"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

If i replaced my Brake switch, put new bulbs in, replaced the fuse and my third brake light still does not work on my 2001 Acrua MDX is there somthing else i can check for?


Check for 12Vdc at the bulb socket. If its there the bulb is bad, the socket is bad (making no/poor contact with the bulb), or you have a bad ground. If its not there, trace the circuit back until you find 12V the break in the circuit will be between the last 2 point you checked.

Mar 02, 2015 | 2001 Acura MDX

2 Answers

2005 Acura mdx passenger side headlight out, bulb ok, fuse ok, what next


Check for power and ground at the headlight plug. Test lights are cheap.

Oct 17, 2014 | 2005 Acura MDX

1 Answer

License plate light bulbs not working on my 2005 mdx


one of your wires has a short in it. probably have to get a new taillight wiring harness

Apr 04, 2013 | 2005 Acura MDX

1 Answer

Tail light bulb


There are removable covers inside both sides of the hatch. You will need to gently pry them back with a flathead screwdriver wrapped in a cloth, to expose the two bolts that hold the tail light assembly to the vehicle. Then remove the two bolts, pull the assembly away so you can reach the bulb socket, turn it counter clockwise and pull the socket assembly with bulb out. Remove and replace the bulb (use the cloth to install the new bulb, don't touch it). Reverse for reassembly.

May 01, 2012 | 2003 Acura MDX

1 Answer

Low beam light bulb issue rsx type s acura 05-06


The three prong base is just the bulb holder.

Here is an excellent tutorial on how to change the build:
http://forums.clubrsx.com/showthread.php?t=303640&highlight=change+bulb

Jan 22, 2010 | 2005 Acura RSX

3 Answers

The rear left brake light is not working on my 2007 JK Jeep Wrangler. The parking lights work and the bulb is fine. Any suggestions?


replace the bulb anyway to eliminate that as a possiblity. unplug the harness check for dirt and bent pints, and plug back in , post results.

Oct 10, 2009 | 2005 Jeep Wrangler

1 Answer

Where is the fuse or fuses for the tail lights on acura mdx.


there's one under the hood another under the dash on the drivers side and possibly one under the dash on the pass. side also. check your owners manual if you have one it should tell you where they're at.

Aug 19, 2009 | 2005 Acura MDX

1 Answer

Tailgate lights for license plate are not working. 2004 Acura MDX


On this website (link below) you find fuse box diagram and description for Acura MDX (2004)

Acura MDX 2004 fuse box diagram Auto Genius

Jun 09, 2009 | 2008 Acura Mdx

2 Answers

Acura mdx 2005


30000 miles.the owners manual will tell you exactly.most honda are 48000 km,exception is the cvt type transmission which there is no service done.

May 26, 2009 | 2005 Acura MDX

Not finding what you are looking for?
2005 Acura MDX Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

john h

Level 3 Expert

23504 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...