Need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter

Question 1

0helpful

1answer

My 2003 Pontiac Sunfire well turn over but will not crank tried spraying gas in the air intake still will not start was running fine now it just wont start even replaced crank sensor and a couple other...

You mean it will turn/crank over, but wont fire.

Check for spark, most likely cause would be crank or cam angle sensor faulty.

Have you checked for obd codes? Is the check engine light illuminated?

Jul 11, 2019 • Pontiac Cars & Trucks

0helpful

1answer

I need to locate the IAC on a 2000 Pontiac Sunfire 2.2 Liter so I can change it. Where exactly is that one located?

Here's a link to your sensor.

Mar 02, 2013 • 1997 Pontiac Sunfire

0helpful

2answers

Where is the cam sensor on a 95 pontiac sunfire with a 2.2 liter engine?

I think the crank sensor is next to the oil filter, and the cam sensor is above the crank sensor.

Jul 30, 2012 • 1995 Pontiac Sunfire

4helpful

1answer

Need to know where the crank shaft sensor is located.

The Crankshaft Position Sensor is located under hood, center, rear engine area, mounted onpassenger side rear of cylinder head.

Fig. 2: View of the Crankshaft Position Sensor (CKP) location-2.2L engines

Fig. 3: The Crankshaft Position (CKP) sensor location-2.3L/2.4L engines

Hope this helps (remember to rate this free answer).

Mar 24, 2011 • 1997 Pontiac Sunfire

5helpful

1answer

Locate the engine temperature sensor

For 1997 Pontiac Sunfire 2.2L SFI OHV 4cyl the Coolant Temperature Sensor is located under hood, driver side, upper engine area, below valve cover, mounted in cylinder head.

Fig. 1: The ECT is also the temperature sending unit for the gauge on the instrument cluster

Hope helps (remember to rate this answer)..

Nov 11, 2010 • 1997 Pontiac Sunfire

2helpful

2answers

My 97 sunfire has a bad cranck shaft sensor. where is that located? would it also make the car not start?

Yes it would and will make the car not start. Your crank sensor is located behind your harmonic balancer, which is the large pulley that turns all the belts. THe one that is coming off the crank shaft.

Apr 10, 2010 • 1997 Pontiac Sunfire

1helpful

1answer

I have a 97 pontiac sunfire swapped motors with a 96 cavalier both engines are 2.2 the crank sensors are different wiring the 96 has three wires leading to it and the 97 has only 2 can I swap crank sensors

As long as the 96 one looks the same as the 97 and fits properly.

Mar 17, 2010 • 1997 Pontiac Sunfire

0helpful

1answer

Where is the crank sensor on a 1997 pontiac sunfire?

Rear of engine, in the center.

Sep 15, 2009 • 1997 Pontiac Sunfire

3helpful

2answers

1997 PONTIAC SUNFIRE ENGINE CODE 0P300 . NEW CRANK SENSOR, CAM SENSOR, MODULE, PLUGS,COIL ASSEMBLY COVER, STILL 0P300 RUNS BAD #1 PLUG WET WET. #2 NORMAL. #3 LOOK RICH BUT NOT WET ALOT OF CARBON. #4 NORMAL...

none fire on plug and the coil and the mdule ers good

Jul 02, 2009 • 1997 Pontiac Sunfire

10helpful

3answers

97 Pontiac Sunfire - where is the temperature sensor located?

the coolant temp sensor is located: Under hood, driver side, upper engine area, below valve cover, mounted in cylinder head

May 05, 2009 • 1997 Pontiac Sunfire

Question 2

Roger Foster

Master 701 Answers
Posted on May 06, 2009

Roger Foster

Master

Joined: Apr 13, 2009

Answers

701

Questions

2

Helped

437363

Points

3451

Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger

Related Topics:

Trustworthy Expert Solutions

Need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter

1 Answer

Roger Foster

Add Your Answer

Attachments: Added items

Related Questions:

My 2003 Pontiac Sunfire well turn over but will not crank tried spraying gas in the air intake still will not start was running fine now it just wont start even replaced crank sensor and a couple other...

I need to locate the IAC on a 2000 Pontiac Sunfire 2.2 Liter so I can change it. Where exactly is that one located?

Where is the cam sensor on a 95 pontiac sunfire with a 2.2 liter engine?

Need to know where the crank shaft sensor is located.

Locate the engine temperature sensor

My 97 sunfire has a bad cranck shaft sensor. where is that located? would it also make the car not start?

I have a 97 pontiac sunfire swapped motors with a 96 cavalier both engines are 2.2 the crank sensors are different wiring the 96 has three wires leading to it and the 97 has only 2 can I swap crank sensors

Where is the crank sensor on a 1997 pontiac sunfire?

1997 PONTIAC SUNFIRE ENGINE CODE 0P300 . NEW CRANK SENSOR, CAM SENSOR, MODULE, PLUGS,COIL ASSEMBLY COVER, STILL 0P300 RUNS BAD #1 PLUG WET WET. #2 NORMAL. #3 LOOK RICH BUT NOT WET ALOT OF CARBON. #4 NORMAL...

97 Pontiac Sunfire - where is the temperature sensor located?

Not finding what you are looking for?

Cars & Trucks

My 2003 Pontiac Sunfire well turn over but will not crank tried spraying gas in the air intake still will not start was running fine now it just wont start even replaced crank sensor and a couple other...

Ask a Question

Check Out the Latest Top Trucks Report!

Top Pontiac Experts

ZJ Limited

Ronny Bennett Sr.

Thomas Perkins

Are you a Pontiac Expert? Answer questions, earn points and help others

Manuals & User Guides

PONTIAC SUNFIRE 1995-2005.pdf....

Http://www.cassies.ca/caselibrary/winn...

Http://www.denker.cz/pdf/2004/04Pontia...

Related Topics:

Trustworthy Expert Solutions

Need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter

1 Answer

Roger Foster

Add Your Answer

Attachments: Added items

Related Questions:

My 2003 Pontiac Sunfire well turn over but will not crank tried spraying gas in the air intake still will not start was running fine now it just wont start even replaced crank sensor and a couple other...

I need to locate the IAC on a 2000 Pontiac Sunfire 2.2 Liter so I can change it. Where exactly is that one located?

Where is the cam sensor on a 95 pontiac sunfire with a 2.2 liter engine?

Need to know where the crank shaft sensor is located.

Locate the engine temperature sensor

My 97 sunfire has a bad cranck shaft sensor. where is that located? would it also make the car not start?

I have a 97 pontiac sunfire swapped motors with a 96 cavalier both engines are 2.2 the crank sensors are different wiring the 96 has three wires leading to it and the 97 has only 2 can I swap crank sensors

Where is the crank sensor on a 1997 pontiac sunfire?

1997 PONTIAC SUNFIRE ENGINE CODE 0P300 . NEW CRANK SENSOR, CAM SENSOR, MODULE, PLUGS,COIL ASSEMBLY COVER, STILL 0P300 RUNS BAD #1 PLUG WET WET. #2 NORMAL. #3 LOOK RICH BUT NOT WET ALOT OF CARBON. #4 NORMAL...

97 Pontiac Sunfire - where is the temperature sensor located?

Not finding what you are looking for?

Cars & Trucks

My 2003 Pontiac Sunfire well turn over but will not crank tried spraying gas in the air intake still will not start was running fine now it just wont start even replaced crank sensor and a couple other...

Ask a Question

Popular Questions

Pontiac sunfire overheating

2004 cavalier p0455

Where to check/put in transmission fluid in 2005 Pontiac Sunfire

What kind of oil does a pontiac sunfire take?

Ignition passlock sensor

Check Out the Latest Top Trucks Report!

Top Pontiac Experts

ZJ Limited

Ronny Bennett Sr.

Thomas Perkins

Are you a Pontiac Expert? Answer questions, earn points and help others

Manuals & User Guides

PONTIAC SUNFIRE 1995-2005.pdf....

Http://www.cassies.ca/caselibrary/winn...

Http://www.denker.cz/pdf/2004/04Pontia...