Question about 2003 Cadillac CTS
Bank 2 Sensor 1 is on the driver side - follow the right side of the engine down the headers which attaches to the catalytic converter. The o2 Sensor you're asking about (Bank 2 Sensor 1) is before the Catalytic. The o2 Sensor after the Catalytic is Bank 2 Sensor 2. Bank 1 Sensor 1 is on the passenger side as well as Bank 1 Sensor 2.
Posted on May 09, 2009
I have a 2003 cadillac ccar and my car was throwing smoke out the back pipe.so I tod it has something to do with the gadgets but I knowrest that there's a sensor broken that runs down it looks like a light bow but is not and seens is just by were I put the oil on the bottom my car started to throw smoke
Posted on May 24, 2017
bank one sensor 1 is the bank of cylinders that number 1 spark plug is located in, bank 2 the other side, this assumes u have a V8, the sensor one location is the sensors that are BEFORE THE CATALYTIC CONVERTER, the sensors referred to as sensor 2 are after the ones AFTER THE CATALYTIC CONVERTER IN THE EXHAUST SYSTEM.
Posted on Apr 28, 2010
Grand Cherokee oxygen sensor locations for 4.0
and 4.7 engines
Four wires (circuits) are used on each O2 sensor:
O2S Sensor removal Never apply any type of grease to the oxygen sensor electrical connector, or attempt any soldering of the sensor wiring harness.
WARNING: THE EXHAUST MANIFOLD, EXHAUST PIPES AND CATALYTIC CONVERTER(S) BECOME VERY HOT DURING ENGINE OPERATION. ALLOW ENGINE TO COOL BEFORE REMOVING OXYGEN SENSOR.
1. Raise and support vehicle.
2. Disconnect O2S pigtail harness from main wiring harness.
3. If equipped, disconnect sensor wire harness mounting clips from engine or body.
CAUTION: When disconnecting sensor electrical connector, do not pull directly on wire going into sensor.
4. Remove O2S sensor with an oxygen sensor removal and installation tool.
02S Sensor installation
Threads of new oxygen sensors are factory coated with anti-seize compound to aid in removal. DO NOT add any additional anti-seize compound to threads of a new oxygen sensor.
1. Install O2S sensor. Tighten to 22 ft. lbs. (30 N·m) torque.
2. Connect O2S sensor wire connector to main wiring harness.
3. If equipped, connect sensor wire harness mounting clips to engine or body. When Equipped: The O2S pigtail harness must be clipped and/or bolted back to their original positions on engine or body to prevent mechanical damage to wiring.
Hope thats help (remember comment and rated this).
Posted on Apr 29, 2010
Increased temperature of the car Cadillac 2003 and the computer asked me to turn off the car and when I opened the radiator cap means and grandmother with a mixture of oil out of the coolant tank in the form of foam for the light beige color
Posted on Nov 04, 2010
Did you ever find a solution to this? I am having the same issue on 2,4,6. I have replaced the coils. checked the intake for vacuum leaks. I am lost here let me know if you find anything and I will do the same.
Posted on Jan 24, 2011
Tips for a great answer:
Mar 10, 2018 | 2007 Cadillac CTS 3.6L
Oct 28, 2016 | Cadillac Cars & Trucks
Sep 30, 2016 | 2007 Cadillac CTS 3.6L
Jul 23, 2016 | 2003 Cadillac CTS
Sep 01, 2013 | 2010 Cadillac CTS
Apr 12, 2011 | 2003 Cadillac CTS
Oct 13, 2010 | 2006 Cadillac CTS
Aug 12, 2009 | 2005 Cadillac CTS
12,436 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: