Question about 1992 Honda Prelude

Car doesnt start

My 1992 honda prelude h23 A1 only starts when it wants usually doesnt when it is humid or hot it doesnt overheat!

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

Classic symptom of main relay - won't start when it's hot outside. The main relay under the dash needs its joints resoldered or just replace it. Good luck!

Posted on May 26, 2009

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

Check your map sensor

Posted on May 14, 2009

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

How to set crankshaft timing on 1992 honda prelude 2.3 liter?

here is a u-tube video with a good tip for making sure the timing marks dont get move once set may help
How to replace timing belt on Honda Prelude 92 96 2 3 lt H23a1

Jul 28, 2014 | 1992 Honda Prelude

1 Answer

Will a 1993 prelude automatic transmission fit my 1992 honda accord

If it's the S model, it *should* as it has a F22 motor in it.. the Si and SE has a H23 motor, and the VTEC has a H22 motor. I have heard of people using the F22 transmission on a Prelude motor for longer gearing at highway speeds (per Honda-Tech.com), but I haven't tried the combination myself

Dec 02, 2011 | 1992 Honda Accord

1 Answer

My friend has a 92 Honda prelude h23 all stock except for an exaust and intake..They just replace the distributor, wires and plugs..fuel pump is fine and fuel filter is new, its getting gas to the engine...

leads on okay check firing order

Feb 07, 2011 | 1992 Honda Prelude

1 Answer

1992 prelude won't start. whbat could be wrong with it

could be the coil in the distributor test for spark ( pull a plug ground it while someone trys to start the car. it should spark, if it doesnt replace coil.with known good.

Mar 09, 2010 | 1995 Honda Prelude

1 Answer

Honda prelude doesnt start

Most likely an air fault, check the airflow meter and air flow sensor, if it is not getting air then it will not start, keep pumping the gas if you can smell it after a while then its getting plenty of fuel.

regards

Dan

Feb 01, 2010 | 1993 Honda Prelude

1 Answer

H23 92 Prelude - Crank Pulley fell off

Make sure you check timing and the belt. if it spun don't risk putting it back on. Hope you got a new key. TIMING is important so you don't stick a valve through the top of your piston

Oct 15, 2009 | 1992 Honda Prelude

2 Answers

Changing timing belt on a 1992 Honda Prelude

????? what did you want know

Oct 13, 2009 | 1992 Honda Prelude

1 Answer

My honda prelude 1992 s the air con doesnt always work! like sometimes ill press it in and the light will come on on the aircon button but mostly it doesnt! the aircon only sometimes comes out cool i think...

need to check the back side of the ac connector where the harness plugs in remove the heater control unit assy and u will see the ac button connector with it still pluged in start the car and turn the ac button on wiggle the ac connector if the light comes on and off it's a loose connection in the harness/connector at the ac button try to jamb a folded over zip tie about 4inches long in between the ac button connector and the plastic frame basicly just make sure that the connector staitionary not wiggling around I had the same problem on my 95 prelude vtec push the ac button sometimes comes on or hitting the dash just got old hope this helps

Sep 30, 2009 | 1992 Honda Prelude

2 Answers

Honda Prelude 1992, doesn' start!

Sounds like a crank postion sensor. Is this only when the car is hot/reached operating temperature

Aug 07, 2009 | 1992 Honda Prelude

1 Answer

1994 prelude h23 2.3 non vtec 5 spd at start up no cel- smooth idle. under accel it jerks and hesitates but rpms stay solid, however unmoving. strong smell of gas. low power. after driving a few minuted...

Try replacing Oxygen sensor (top of exhaust pipe just rear of engine; 22mm ring-spanner job after cutting wires); though normally comes up with Code 1 on the MIL, this is the right bunch of symptoms.

Jun 12, 2009 | 1999 Honda Prelude