My shifter didn't quite line up with the gear it was in. While trying to fix it, I broke the cable. How difficult is it to replace the shifter cable?
SOURCE: Shifter cable broke in 1998 chevy suburban
Ok, Disconnect it from the Tranny First. This will make it easier to Fish Through. Connect the New Cable on the Tranny. Follow where the Old one Goes with the New one, Removing the Old one as you go. It will enter the Cab and work it's way up to the Sterring Column. You will Need to remove the Dash Panel to Access the Cable on the Shifter, It just Pulls Loose. You are at the Hardest Part of this at this Point. Let me know if you cannot access the Shifter From this Point. Please Rate My Response! Thanks!
SOURCE: i have a 98 chevy cavalier 2.2L and need to
Kind of a pain in the neck - especially if you are not real inclined..
You have to take apart portions of the console to get at the cable where it connects to the shifter.. And disconnect the old cable at the shifter and at the trani linkage under-neath..
Not a real fun job..
Have a great day !
SOURCE: my husband broke the gear shifter off of the
get a new lever punch out the roll pin that holds it in.replace lever and reinstall roll pin
228 views
Usually answered in minutes!
×