Question about Cars & Trucks
If you are looking for the fuse box diagrams or any other diagrams for your Ram, check promanuals.net for a factory service manual for around 20 bucks or so. It's an invaluable tool for my Ram 2500.
Posted on Sep 26, 2009
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
Tips for a great answer:
May 22, 2016 | 2011 Dodge Ram 2500
Sep 27, 2011 | 2004 Dodge Ram 2500
Jan 20, 2011 | 2005 Dodge Ram 2500 Truck
Apr 20, 2010 | 2005 Dodge Ram 2500 Truck
Sep 23, 2009 | 2005 Dodge Ram 2500 Truck
Sep 22, 2009 | 2005 Dodge Ram 2500 Truck
Sep 05, 2009 | 2005 Dodge Ram 2500 Truck
Jun 01, 2020 | Chrysler Cars & Trucks
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: