How to change spark plugs on hyundai santa fe 2004 2.4L
Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.
SOURCE: changing spark plugs
You most likely have a big cover over the engine that is covering everything up. If you can get that off (sorry, I've never removed one) you should be able to see the plug wires/coil on plugs, whichever the vehicle has. 4 or either 6 depending on the number of cylinders. You may just see black rubber looking caps. Plugs are under them.
SOURCE: changing the tail light assembly on a 2004 hyundai santa fe
lift the tailgate, and you should see 2 screws on the side of the lamp assembly. remove the screws, and remove the lamp assembly by sliding it sideways away from the vehicle. you will be able to access the bulbs & sockets once the taillamp has been released.
SOURCE: Change serpentine belt 2004 Hyundai Santa Fe
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
SOURCE: 2004 hyundai santa fe drain plug
Hi
I am very assumming that you are looking for the drain plug for the rad, right? It is located in the bottom of the rad, right side of rad standing in front of it. You can excess it with a philips scewdriver through a hole in the sub frame.
SOURCE: How do I change the
first you have several plastic covers to remove so that coils can be seen. then remove the coils and the plugs are under them.
2,802 views
Usually answered in minutes!
Change alternator
×