- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Follow the flasher wiring to fuse box and locate the fusible link. Looks just like the wire but softer exterior and it's a fuse able wire that can break down. Should be along the driver fender under hood.
With a test light check if you have power there with lights on and with lights off, compare left side with right side as far as location in the tail lamp plug for the tail lamp park lights.Trace the harness back to the left side underneath usual corrosion in this area.
more than likely it will be a faulted brake light switch...located on your brake pedal itself.....closer towards the firewall.. easiest to buy a chiltons manual...or possibly ask your neighborhood auto repair shop for the wiring schematic for your brake light switch.....hope I helped!!!
Get a tester light the type with an alligator clip and a sharp point.
Check each wire for your brake lights,blinkers etc.
i.e. With the blinker light on find the correct wire and splice into it with the corresponding light on the trailer. ( DO NOT CUT THE TRUCKS WIRE)
Remove the covering and twist the plug wires around it and tape or shrink wrap if you can.
Hope this helps