Question about Chevrolet HHR

1 Answer

I have a 2008 HHR panel. I don't have a remote key fob. I have one lock and the key only turns and won't unlock the door. I don't have a spare key. I've tried everything. How can I remove the rear window? Or do you have other suggestions? Thank you for your help.

Posted by George Carden on

Ad

1 Answer

Denny Giesel

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 818 Answers

Most towing operators can break into your car for you without tearing anything up for around $40-cheers Denny p s they are professionals and do it all the time.

Posted on Nov 02, 2013

  • George Carden
    George Carden Nov 03, 2013

    I'm calling in the morning. Hopefully, they can do it. Thank you.

×

Ad

3 Related Answers

Anonymous

  • 2 Answers

SOURCE: my renault laguna 1999 rt remote key fob wont work?

IF YOU TYPE 1999 RENAULT LAGUNA REPROGRAMME KEY INTO A GOOGLE SEARCH, YOU WILL BE ABLE TO PRINTOFF INSTRUCTIONS TO REPROGRAMME THE KEY TO THE KEY READER.THE IGNITION NEEDS TO BE OFF TO DO THIS

Posted on Dec 02, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: c240 mercedes key wont turn seems locked

I have a 2001 C240 with the same issue. I removed the positive battery cable from the battery and kept it off for 30 seconds then replaced it. Everything was reset and the key worked.

Posted on Feb 10, 2010

Anonymous

  • 52 Answers

SOURCE: my Porsche Key fob no longer unlocks the doors

Insert key into door barrel or ignition lock and turn key, whilst doing this press the unlock/lock button, the led on the dash should flash to indicate this has initialised the key to the car, then remove key and test operation of remote. If this fails then a new remote plus coding to the car by your dealership is needed

Posted on Apr 29, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a new key fob into my Chevrolet HHR LT


Turn the key "ON" "OFF" "ON" "OFF" "ON" "OFF" "ON" and leave in the "ON" position. Press and hold both the lock and unlock buttons on the remote until the doors lock and unlock. Turn the key "OFF" and your remote should be programmed. If this doesn't work, you might have to take your vehicle into the dealership.

Jul 10, 2015 | 2007 Chevrolet Chevrolet HHR LT

1 Answer

Citroen C5 (2008)


if the key wont unlock the door and the fob does then the linkage from the lock to the key has come apart, as the fob is actuating the electric motor , will need to strip out door panel to see where the connecting rod has got to

May 27, 2014 | 2008 Citroen C5 1.8

1 Answer

How to replace 2008 HHR lock switch


If it uses FOB that uses 1 switch for lock/unlock, check if the switch is not stuck at 'ON'. If you have a spare key, try using that one with the first key kept away from the car. Or you can remove the battery from the first FOB.

May 14, 2014 | 2008 Chevrolet Hhr

1 Answer

Key won't unlock driver door


the key or fob?
the key is bad,
use the spare key that came with all new cars.
always keep a spare. or get stranded.

Feb 22, 2014 | 2007 Honda CR-V

1 Answer

2004 Grand Vitara. Warming the car this morning, locked it.Came back with remote and a key and the doors would not unlock.Engine was running with the other key in it. Had to have a locksmith break in. Why...


don't have 2 fobs?
it cam with 2,
and the battery must be good.(for buttons to work on fob)
never run any car with only 1 fob or one key.
or get locked out.
are you saying the metal cut key end (pure mechanical ) failed?

my car has a real key with a a transponder inside .
it can open 2 ways, the keyfob buttons, (takes a good battery)
and the key metal end.

get a spare fob and program it.
http://blog.keylessentryremotefob.com/2013/07/2008-suzuki-grand-vitara-key-fob-remote.html

now you have 2 like you should.

Feb 07, 2014 | 2009 Suzuki Grand Vitara

1 Answer

2008 cobalt remote unlock sticking


Do you have any phone chargers, radar detectors, dash cams installed? If so, disconnect them and try again. Those can interfere with recpetion. Also, turn off your cell phone when trying to open the doors remotely..see if that makes a difference. Anything electronic can cut down the range

Dec 06, 2017 | 2008 Chevrolet Cobalt LT1

2 Answers

Lost set of keys, alarm was on car locked. Found spare key only, it will open door, alarm goes off, but the key won't start engine. It will turn in ignition, but dead! It's a Chevy HHR 2006! HELP


Close the doors. Lock the doors using the buttons on the key fob. Use the fob to again unlock the doors. The key should then work the ignition. If this will not work, you will have to tow your vehicle to the dealer and buy a new key and/or fob and have it programmed to the vehicle.

May 13, 2012 | 2006 Chevrolet HHR

4 Answers

My 2008 Land Rover LR2 HSE key fob won't


So did you fix your problem? I'm now having the same exact problem. The key simply doesn't work; HOWEVER, I know the key is not dead. I also have a 2008 LR2 and there is no "Battery" in the key fob. I compained countless times to the dealer that the key would just stop unlocking doors on me. They told me the battery charges when it is in the ignition but there is no battery to replace. They recommeded I rotate my main and spare key to make sure they're both always charged. Well, I do, and same problem.

This problem started one year ago and I complained that I should not have to spend $500 for them to replace the key... because a 3-year-old key SHOULD NOT be dying. And not to mention, a large chunk of that $500 is for them to "program" the key.

I have an appointment on Friday at a certified Land Rover repair shop but NOT the dealer. The shop I called said the '08 LR2 has "huge key issues." I have had it with Land Rover and their lack of interest in helping deal with the problem, which I might add is clearly THEIR problem, if so many are having similar problems.

I will post an update after my appointment Friday.

May 08, 2012 | 2008 Land Rover LR2

4 Answers

Program a remote key for 03 A6


I have an A4 and did this to re-program my key:

1. used the key to start the car...then turned it off
2. put the key in the driver door (door closed)
3. pressed the lock button on the key fob once
4. turned the key to lock the door.

This is basically the steps in the owners manual, but the car must be started with the key first, and the key must be in the door lock before pressing the lock button.

Dec 10, 2008 | 2003 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23504 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...