SOURCE: 1999 chrysler 300m stalls when coming to stop and low power
Change the Cam Position Sensor.. It done the same thing on mine. The sensor runs about
40. to 60.00 at most parts stores Your gonna have to take off the upper intake or plenum to
get access to it. Top of the engine right side, you'll see it
SOURCE: loud tapping noise under hood of my 06 chrysler 300c
CHECK THE OIL LEVEL, IT MAY BE LOW AND WHAT YOU HEARS IS A VALVE TAPPING.
SOURCE: 2003 chrysler 300m o2 sensor and camshaft position sensor
SOUNDS LIKE YOU HAVE CAMSHAFT DAMAGE.
SOURCE: i have no brake lights on my 2003 chrysler 300M
Look above your brake pedal and you will see your brake switch up along your brake pedal arm. It will either be between the brake arm and the firewall so when you brake it pushes the switch in. Or it will be between the dash and the brake arm so when you brake it pulls the switch out. Most likely this switch needs to be replaced
SOURCE: "Check Engine light"
The issue is that the system randomly checks the loop of the fuel system to confirm that it has no leaks. A missing cap is the easy one to correct. It might also be a slpit in the rubber hose that connects the fuel fill tube (on the chassis) to the one on the tank, or any other hose in the the entire fuel delivery/ fume recovery sysrtem. The solenoid that allows the engine's vacuum to be used to conduct this test can also be sticking so that after the test cycle, it doesn't reclose. Good luck
168 views
Usually answered in minutes!
×