Rear fuse panel 2008 gmc canyon - 2008 GMC Canyon Crew

SOURCE: how do i replace the rear tun signal on a 2005 gmc

fold down the tailgate and remove two black screws from the inside raight out and your done.of the body on the left or right side of the light fixture. Push the lens out to expose the sockets and turn the socket a quarter turn and pull out. Unplug the old bulb by pulling it st

SOURCE: c hange rear blade 2008 gmc

At the mounting area of the blade to the rotating wiper arm is a tab that has to be pushed in and held to remove the wiper blade. The tab will be on the wiper blade's center housing ansd is very small to see

SOURCE: How do you remove the

Hi,

Thank you for contacting fixya.com.

If you have the leather seats, there are clips that prevent them from being extracted easily. On front seats some are released by squeezing the seat back cushion around the base of the head rest posts or when you flip the seat forward the clip is released. Otherwise, remove the carpeted hard back, usually held in with pop clips, to access the head rest post clips. Slide the clips off and remove the head rests.

Also check if there is a little hole in each plastic base of the metal bars. You need a very small screwdriver, allen key or paperclip to insert into the holes while pulling up on the headrest and it will come off.

Please get back to us if you have further query else please accept the suggestion.

SOURCE: Rear Main Oil Seal leak 2008 GMC Canyon

I think this is for an oil level sensor. Should be easy to change , or a shop can do it for a nominal charge. The dealerships will want more.