Question about 2004 GMC Yukon

1 Answer

Color code 91 Buick Electra

I am converting to power remote side view mirrors on a vehicle that didn't have them origanly. They are from a 91 Buick Electra . I have the original control switch but I don't know if the wiring from the switch is the same colors as the mirrors themselves.

Posted by kattweed on


1 Answer

Eric Heifetz

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 607 Answers

Colors will be the same on both ends ( the switch and the mirrors . Unfortunately both left and right mirrors have the same wiring colors. Check electical flow through the mirror switch so as to know which wire controls left mirror and which wire controls right mirror, to insure you don't re-wire in error . Hope this helps

Posted on Apr 27, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is fuel relay switch on a 1987 Buick Electra? I think it might be under the front drive seat??

Mar 21, 2017 | Buick Cars & Trucks

4 Answers

Replace the review mirror

You need to remove the plastic plate that cover the mirror joint from the inside and undo the three bolts.

Oct 30, 2008 | 2006 Chrysler Town & Country


Parallel Parking

Hello, and thank you for choosing This, to many, may seem like a rather unorthodox tip, however, I believe, as I practice it myself, is a very useful tip:

Parallel Parking: If you own a 1998 Plymouth Grand Voyager SE (or any vehicle with power side view mirrors).

When attempting to parallel park your minivan (or other (larger) vehicles), equipped with power mirrors, on the right hand side of the road - adjust the right side mirror so that it faces down so that you can see the curb (when you've reached this point) - This will help keep from scraping your tires on the curb, as well as making sure you are far enough in and reduce the number of times you have to pull forward and backward to get it right.

Remember, however, to adjust your mirror back to it's original state for driving, before exiting the vehicle so that you won't be distracted doing it while driving. It is also a good habit to check all your mirrors before driving; especially if more than one person drives the vehicle.

Thank you for choosing, and I hope that is tip proves useful to you. Please let me know if you have any questions, comments and addtitions to this tip.

Again, thank you and have a great day!


on Apr 17, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Windows, side mirrors and door locks suddenly stopped working on 2002 Buick Lesabre Limited

The first thing to do would be to hook up a factory or professional type scan tool an check for DTC'S - diagnostic trouble code's . This vehicle has very complex electronic's. Serial data communication network,class2 data bus . There are electronic modules inside the door's that control the lock's ,power window's , power mirror's . Your best bet ,take it to a qualified repair shop . Not a fuse problem , driver an passenger door module each have thier own power supply. Two circuit breakers ,PWR/WDO circuit breaker 30 amp. You could check DRVMDL 10amp fuse ,located in the rear fuse box , PASSMDL 10amp fuse rear fuse box , RRDR/MDL 10 amp fuse rear fuse box . Rear fuse box is under the back seat . None of the window's , lock's etc.. work from any door switch ?

Nov 30, 2017 | 2002 Buick LeSabre

2 Answers

Need to replace drivers side rear view mirror, powered. I have the new mirror, just need to know how t install it.

You remove the door panel on the inside and it is bolted on from the inside. One wire clip and 3 bolts. Takes longer to remove and replace the door panel than replace the mirror....look for a hidden screw under the armrest , under the window/door lock button panel and sometimes behind the reflector or light on the bottom of door..Usually there are 3-4 screws and then the rest of the panel is held on by plastic clips. Get the screws out, then work a flat screwdriver or putty knife around the sides and bottom of panel, then lift upwards to get the top sealing side out of the track where the window runs.....Mike

Jul 14, 2011 | Buick LeSabre Cars & Trucks

1 Answer

My glass mirror only is missing on my 2000 buick lesabre what can I do?

I assume you are talking about the rear view mirror inside the vehicle. Did it fall down or is it actually missing. Seeing as you said missing - Buy a replacement mirror and buy a package or rear view mirror adhesive that contains glue and an activator. Follow directions on package. If it fell down, follow steps other than buying a new mirror.

Mar 26, 2011 | Buick LeSabre Cars & Trucks

1 Answer

I have a 2010 Buick La Crosse CXL and when trying to set the memory for the seats and outside mirrors I can only get the seats to retain the memory. When I place the car in drive the mirrors go down out...

this might be what you're experiencing.......
Park Tilt Mirrors
If the vehicle has the memory
package, the outside mirrors
have a park tilt feature. This feature
automatically tilts the outside
mirrors to a preselected position
when the vehicle is in R (Reverse).
This allows the driver to view the
curb for parallel parking.
The passenger and driver mirrors
return to their original position
when the vehicle is shifted out of
R (Reverse), or the ignition is turned
off or to OFF/LOCK.
This feature can be turned on or
off through the Driver Information
Center (DIC)

The audio system controls are used
to access the personalization
menus for customizing vehicle
features. (DIC)
CONFIG (Configuration):
to access the Configuration
Settings Menu.
Press the
center of this knob to enter the
menus and select menu items.
Turn the knob to scroll through the
Press to exit or move
backwards in a menu.

Sure hope this helps!
Best to you.

Mar 06, 2018 | Buick LaCrosse Cars & Trucks

1 Answer

I've got a broken driver side rear view mirror on a 1990 Buick Century. I've got the replacement mirror, I just need help getting the old mirror off the door. Suggestions?

This is what you do take the door skin off of the inside of the door and at the top corner there will be i think three nuts and than your going to need door clips after your done in order to put the door panal back on

Apr 07, 2010 | 1990 Buick Century

1 Answer

Fix 2002 buick rendezvous side view mirror

it sounds like the mounting bolts embedded in the mirros housing were pulled out somewhat.You will not know untill the mirror is removed. If the studs that hold this mirror housing to the door are pulled out take a heat gun to get the studs warm and twist them back in flush. them apply JB Weld to the studs lowest part to the mirror housing so they stay secured

Feb 06, 2010 | 2002 Buick Rendezvous

1 Answer

Replace a broken side mirrors on 91 Accord

your new mirrors should come with the instructions shor installing and wiring them up, if ordered for your car.

Sep 01, 2009 | 1991 Honda Accord

Not finding what you are looking for?
2004 GMC Yukon Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides