2001 Mazda 626 Logo

Related Topics:

Anonymous Posted on Apr 26, 2009

Reverse and no foward gears

My Daughter and her husband have a 96 626 4 auto and is having problems with no foward gears but reverse works just fine, HELP!!! Cant drive it in reverse to a mechanic to hook up a cumputer code reader to find the problem

  • Anonymous Apr 26, 2009

    I'll let her know

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Expert 126 Answers
  • Posted on Apr 26, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Apr 19, 2009
Answers
126
Questions
0
Helped
40330
Points
429

It will probably have to be towed in and checked out. This can be a total failure of forward gears and necassary for knowledgable person to diagnose,< if you decide to two use a dolly that you can rent about anywhere not strap because it can cause even more damage to transmission pulling this way>. It could be simple,but needs diagnosed by someone who can tell you properly.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Reverse not working on 1985 chevy 1/2 ton pickup

I would have it flushed as the filter and fluid only get about 1/4 of the fluid and it sounds like there is a lot more sludge in there.
0helpful
1answer

I have a strong reverse in my 1998 blazer's auto transmission but no foward gears work. Do I need a complete overhaul or change the filter and solenoid?

After making sure trans is full on trans fluid and checks good next try cleaning out the electrical plug, BIG GREY PLUG with lots of wires on the top side of trans, passenger side right next to exhaust. Sometimes they get water in them and short them out causing them to not shift. Also check the fuses inside. Look for shift solenoid. There should at least be one or two. If fuses and plug all check out good it is possible that solenoids are bad. A bad sparg assembly could also cause problem Inside trans. Let me know what you find. If still no forward pull down in first gear and see if it move. If so trans will need to be removed.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589

0helpful
1answer

Ican not get reverse gear on my citroen c3 foward ok

hy, citroen c3 automatic gear not working reverse gear
0helpful
1answer

Why doesnt my car go in reverse the reverse lights go on and it kicks but no movement

if you have an automatic gear box , then it is very possible that you have reverse band is broken inside gear box , , light will come on because switch for reverse lights may be actuated by shift lever not gears .

there is a foward band and reverse band in auto gerabox's so if you are able to drive forward this gearbox will need to be repaired or replaced .

if manual gearbox , you may find a reverse linkage loose , or gears dammaged in gear box .
good luck hope this helps
1helpful
1answer

1988 wrangler goes foward but not in reverse. It won't engage in reverse. 1st, 3rd, 4th are great 2nd winding sound. what needs to be fixed or replaced?

it sounds like you have 2 bad gears, 2nd gear may be fine for an hour or for ten years, theres no telling on that. your reverse gear is probably shelled out. your best bet is to rebould your transmission or buy a new one, sorry
3helpful
1answer

I have an 2000 honda accord ex v6 3.0 with reverse gear

IT sounds like your reverse gear is going out, or that you need to have filter replaced my best advise is have your transmission checked out by a transmission shop as soon as possible.
1helpful
1answer

Have a 94 New Yorker when I put it in reverse I get a red R on the PRNDL and don't have reverse all other gears are green and work. What might be causing this?

the reverse clutch in the trans is after failing.there are two clutch packs in trans for reverse,low/reverse and reverse clutch in overdrive unit,so where you have all foward gears the low/ reverse is ok the reverse clutch in od unit is most likely culpret
2helpful
2answers

The truck has no reverse, all foward gears work fine

That can be, and often is, an indication that you need a new tranny filter and fluid change. If that doesn't solve the problem then the pump in the tranny is getting worn.
0helpful
1answer

All my gears work fine but i wont go into reverse 1997 jetta

if your trans engages properly in fowards and not into reverarse then you have a worn clutch in the trans and the trans will need to be rebuilt
0helpful
1answer

1999 elantra transmisson does not have reverse foward gears work fine it is auto overdrive

transmission code @check engine light on or history code vechile input and out put sensors
Not finding what you are looking for?

380 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...