The driver window would slip off track when you opened it on occasion. it eventually dropped while my son was driving it. He took it to a dealership and they closed it permanently. They wanted $600 from him to fix the window. Told him it would need new glass, track & regulator. I find this hard to believe. Next is the sunroof will slide open but will only close 3 inches short. I had to manually close it with an allen wrench. What are your recommendations? Thanks,
SOURCE: How do I close the rear side windows in a 2007 lincoln navigator?
the switch is located in the overhead console.
SOURCE: 05' lincoln navigator sunroof won't open and motor
The motor is stripped out. The sun roof might be binding on the sun roof track and the motor is not strong enough to move the roof. I would first replace the sun roof motor if available seperately.
You mihgt have to get the complete assembly because of part availability
SOURCE: 1993 lincoln towncar sunroof switch
I know this is an old blog but some people may still find it helpful. There are 4 wires in the roof window switch hooked up to 2 smaller harnesses that have 2 wires each.
Remove the switch and use only the metal contacts in the harnesses. One should use a light tester to confirm which one is the ground and live. this is how it turned out for my car.
One harness has a light blue wire with a black stripe, and a black wire. the blue one is live, the black one is ground.
The other harness has a red wire and a darker blue wire (silly ford) these are the motor connect and return wires.
You must hook up thhooked to (example, if the live wire was connected to blue motor wire and the ground wire was connected to red motor wire and it opened it, that would mean you would want to put the live wire to the red motor wire and the ground wire to the blue motor wire)
When doing these wire connections, it is advised that you have the ignition turned off. Once you make all the connections properly, you can turn on the ignition and if done correctly, the roof window will move. Once it is closed, remove the wires frome the harnesses and LEAVE THE ROOF WINDOW ALONE UNTIL YOU HAVE A NEW SWITCH.
e power (Live, light blue) wire to a motor wire. You must then run another wire from the other motor wire. To complete this circuit there is only one place that this last wire can go and it is to the ground. once this is connected the roof should either open more or close.
To reverse the operation of the roof, simply reverse the position of the live and ground wires in respect to which motor wires they are
SOURCE: 1995 lincoln town car trunk will not automatically shut
There is a black flat switch handle immediately to the right side of the latch. Press that switch handle and the latch will make a noise and rise slightly. Then when you shut the deck, the switch activates and recesses, pulling the deck lid down to the fully closed position.
Hope this helps
[email protected]
255 views
Usually answered in minutes!
×