Question about 2002 Dodge Ram Maxi
Posted by Anonymous on
SOURCE: ignition coil
The hemi has 8 ignition coils, one for each cylinder. They're hald on by 2 10mm bolts and also have an electrical connector and early models have a plug wire going to them. To remove them you must take out the 2 bolts, pull the ignition cable off if its got one and disconnect the electrical connector. Then it pulls right out. The electrical connector has a red locking tab that must be slid over or pulled outwards depending on the design, but DO NOT completely remove the tab. Then push the connector on a little bit, squeeze down the black release lever tab and pull it off.
Posted on Apr 18, 2009
Here you go:
5.2L and 5.9L engines Firing order: 1–8–4–3–6–5–7–2 Distributor rotation: Clockwise
Diagram link below:
Best of luck!
Posted on Jun 14, 2009
I had a similar problem and had to change the distributor pick up. Quite easy and parts were less than $30.00. It was for the B250 model, and the 318 engine....but I suspect there is a similar pickup in distributor for the bigger engine
Posted on Oct 18, 2009
Testimonial: "thank you"
Tips for a great answer:
Jan 27, 2016 | Cars & Trucks
Aug 25, 2012 | 1997 Dodge Ram 2500 Club Cab
Apr 19, 2012 | 1993 Dodge Ram 250
Mar 25, 2011 | 1994 Dodge Ram
Apr 07, 2010 | 1999 Dodge Ram
Sep 03, 2009 | Dodge Ram B350 Cars & Trucks
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: