Question about 2011 Ford F-350 Super Duty

Open Question

I have a 2011 ford super duty 6.7 L f350 it has an engine code p208b can you tell me what this code means

Posted by Anonymous on

Ad

5 Related Answers

emissionwiz

Marvin

  • 85239 Answers

SOURCE: diagnostic code meaning

P1247 means the Turbo Boost Pressure Low, this may be a turbo issue or a defective waste gate.

Posted on May 03, 2009

Ad

Anonymous

  • 58 Answers

SOURCE: Shut 05 Ford f350 diesel off wont start

when you get a code the PCM will keep that code and till it get easased. you need a scaner or disconect your battery for 1h. this should clear your codes. when the battery is disconected don't sit in your can. the air bags may deploy if you hit the steering collem or a sensor to hard. just let it sit. reatach your battery then try to start your truck. if the codes are still pressent you make need let the car sit for longer or bit the big one and get the shop to do it.

Posted on May 30, 2009

Ad

Dr Honeydew

  • 93 Answers

SOURCE: Shut 05 Ford f350 diesel off wont start

dies the truck restart once it cools off? it is very common for th 6.0 to have high pressure oil issues on a hot soak. they will run till the cows come home but once shut off they can not build up enough pressure by cranking speed alone to start truck until it cools down and the seals become rigid enough to bridge the gaps they are sealing in the first please. if this is the case. it may be the STC fitting ojn the back of the high pressure oil pump (intake and turbos must be removed to check) or possibly the branch tube o rings have worn. the branch tubes are located under the valve covers and supply the fuel injectors the oil they need to perform their "power stroke"...

Posted on Jun 06, 2009

anthony ventura

  • 180 Answers

SOURCE: 2004 Ford F350 Super Duty Power Stroke 6.0 engine;

on the pass side fender there is a starter solenoid! check is part with a lite tester!

Posted on May 18, 2010

duane_wong

Duane Wong

  • 6826 Answers

SOURCE: where do i find the turn signal flasher on 2000

I would turn the turn signal or the hazard flashers on to find the respective flasher that 'clicks' when you hear and feel it, if functioning correctly.

It probably is buried underneath the steering column area under the dash.

Posted on Aug 29, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I changed my fuel filters on my 6.4 l f150 2008 now won't start .I cycled engine but smelled a faint smell and saw light smoke from under hood .charge batt.still won't spin .did started go out too


F350 6.4 L 2008 Wont Start after Fuel Filter Change - Ford Truck ...

www.ford-trucks.com > ... > Super Duty & Heavy Duty
Dec 8, 2011 - F350 6.4 L 2008 Wont Start after Fuel Filter Change Super Duty & Heavy Duty. ... My only suggestions are change them again or take it to Ford. ...Rancho 9000 shocks 1992 F150 XLT 2x4 Standard Cab Long Bed 302 ... Priming it now won't help, because the air bubbles are already past the fuel return line. 2008 won't start after fuel filter change!
Aug 5, 2012
Fuel Filter change problem
Jan 7, 2011
F-350 won't start after oil change and fuel filters changed ...
Dec 10, 2010
Need help fuel filter change now it wont start
Jul 2, 2010
More results from www.ford-trucks.com

Jan 25, 2016 | Cars & Trucks

2 Answers

Diesel. Reduce power lite turned on. Shut off engine and started back up - lite is off. Can it be driven?


Jerry, Drive to a good shop. So many things can cause reduced power light unfortunately. The first step would be to get the truck hooked up to a scanner/computer and have the computer scanned for trouble codes. One thing that you could try is to drain the water from the water separator that is mounted on the frame under drivers front door. If the PCM picks up on water, power is reduced until water is removed/drained. It could be an exhaust sensor that is reading faulty. Unfortunately from here its impossible to tell you exactly what the fault is because there are just so many engine sensor inputs that could cause your problem. Check the attached links, forums,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Reduced Engine Power Light Wrench Showing Ford Powerstroke Diesel Forum

08 Reduced Engine Power

Regen Reduced Engine Power Light Ford Truck Enthusiasts Forums

Help reduced engine power light comes on

Dec 29, 2015 | 2008 Ford F-250 Super Duty

1 Answer

2001 F350 v10 super duty, It won't go into second


first, i also like FORD f350, and there is the info of the DTC
P1000 - Ford Type Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled Description OBD II Monitor Testing Not Complete Conditions
Cause Key on or engine running, this code is set when a PCM Reset is performed and then one or more of the OBD II Main Monitors have not been completed It should be cleared from the PCM to pass an I/M Test for registration
or you can ask the 24 hrs live technical support obd2 multidiag actia, they will like to help you, good luck

Aug 18, 2013 | Cars & Trucks

1 Answer

Check engine light is always on, techs have no answer yet 2011 ford f350


do a generic obd2 test it will show what codes are set / if light is allways on ti is a hard code
the vehicle is more than likely in default

Jan 07, 2011 | 2011 Ford F-350 Super Duty

1 Answer

Tell how to take a f350 radio out ford f350 2003


You say you have tool.......do you mean as in plural? I believe on the Fords there are a set of double holes on both sides of the radio and you have to insert both tools in both sets of holes. Then pull on the radio to get it out.

Dec 10, 2009 | 2000 Ford F350 Super Duty Super Cab

1 Answer

Check Engine light is on and Engine vibrates. Light is not flashing. Changed fuel filter. What next.


What engine? Sounds like a misfire. I would have someone check the engine codes (autozone does it for free) and post what they tell you. It's always a safe bet to clean the mass airflow sensor as a place to start

Nov 21, 2009 | 2000 Ford F350 Super Duty Super Cab

1 Answer

Wich number tells you fords truck engine in the


8th diget from left is engine code
F= 7.3L V8 turbo diesel

Oct 20, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

Not finding what you are looking for?
2011 Ford F-350 Super Duty Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...