2000 Lexus ES300 trunk lid does not fit right on 2001 Lexus ES300

Question edited for clarity.
Question moved to model category

Fuses 2 or 31 at a guess. Not mentioned specifically.

https://fuse-box.info/lexus/lexus-es300-es330-xv30-2001-2006-fuses-and-relay

..

The usual method for most cars is to use shims between the lid and the hinge, but not sure if this works for yours.

Check this website you find there fuse box diagram and description for Lexus ES300 (2000 - 2001)

http://www.autogenius.info/lexus-es300-2000-2001-fuse-box-diagram

Have a local shop listen to this.

i have a 1997 lexus es300 having problems with unlocking the doors and the trunk with the keyless remote the doors will lock with the keyless remote

If the spoiler has mounting studs then holes will need to be drilled into the trunk lid so that the spoiler can be bolted on from inside. You must figure out where to drill the holes so that the spoiler will be centered on the trunk lid. One method is to apply shoe polish or machinist dye to the end of the mounting studs. carefully place the spoiler onto the deck lid where you would like it to be. Press straight down and then lift it straight off with one motion. The spots that are left behind is where the holes should be drilled. The holes can be enlarged slightly to allow for final adjustment. Use spacers between the spoiler and the deck lid to keep the paint from being damaged when closing the trunk lid.

MAKE SURE THE CABLE IS NOT BROKEN OR STRETCHED.

You don't have to take the lense apart to replace the bulb. Pull inner liner in the trunk back and your find where the light wiring is. Unscrew the light holder and replace the bulb.

Hi ....... Look up under the footwell and brake pedal, theres a switch mounted onto a metal bracket, they should self adjust to compensate for wear etc ............... remove from the bracket and make sure contacts and action is good.