Question about Mazda Cars & Trucks

1 Answer

Mazda 2 (2004) central locking and alarm fault. My

Mazda 2 (2004) central locking and alarm fault. My central locking is broke on my Mazda 2 which means I can't switch the alarm off. I've disconnected the bit of the alarm which makes the sound and removed the fuse which controls the hazards flashing - but a light is flashing on the dashboard which suggests the alarm is still being activated. Does anyone know how to completely disable the factory fitted alarm on this vehicle?

Posted by mark lupton on

Ad

1 Answer

beni

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How can i find central locking in mazda premacy tell me plsss

Posted on Mar 30, 2014

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: HAZARD LIGHTS ON BUT NOT

HI,
I have the same problem - it is the relay switch attached to and behind the hazard warning triangle on the dashboard. Pull it all out (gently and replace (£60 ish). The indicators and hazard lights are on the same relay circuit. This is a well known problem for this car (amongst others - how about the wipers sticking)

Posted on Nov 25, 2008

Ad
lnwolf33

Eric Ehresman

  • 14 Answers

SOURCE: cannot disable anti theft alarm driving neighbours mad

There should be a relay under the hood for the security system, if you can not find it, try jacking the front of the car up, it should have a sensor that tells it that it is being towed and should turn off, unless of course it has a bad wire that is grounding out.

Posted on Jan 28, 2009

Anonymous

  • 188 Answers

SOURCE: VW Polo 2000 1.4 16V Blowing fuse for Central locking / windows

car electrics are a nightmare. the car lights up when a door is open i presume. and by bypassing the central locking. the electric computer says there is a fault. and will not start. that i think is programed in. best thing to do is. go to phone VW dealer ask about diagnostic test without repair. about £35 then fix it yourself. they garentee it right I think. the dealers have come into line better with that kind of thing phone and ask anyway.

Posted on Mar 26, 2009

JIMMY SMITH

  • 160 Answers

SOURCE: I can't disconnect my '98 toyota camry car alarm.

BEHIND THE DRIVERS KNEE PANEL IF IT IS FACTORY IT SHOULD BE JUST BEHIND THE DUCT WORK YOU CAN ALSO JUST UNPLUG THE PIGTAIL HARNESS IN BETWEEN THE IGN. SWITCH AND THE ALARM (PLEASE RATE THIS)

Posted on Apr 19, 2009

Wahs Team

  • 215 Answers

SOURCE: 307 central locking fault

If you have replaced the battery and the ecu wasn't in sleep mode, then you'll lose the synchronisation between immobiliser and fob. go to peugeot dealer or call out a car locksmith who then can reprogram your fob with car ecu. I have read the method in internet but not sure what the steps were. you can google it may be you'll find it.

Posted on Sep 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2008 town and country trunk will not open at all with key, inside or even manually. It just beeps and then sounds like it's latching to close again?


central locking fault might just need resetting, if you can get into the vehicle and remove the battery terminal. negative side. leave it off and then open all the doors by hand, and leave the doors open/boot as well. reconnect the battery after a few minuets or after 10min. it should reset. if not then it might be the drivers side lock that's the problem it has switches in there that control alarm and central locking

Jun 26, 2017 | Cars & Trucks

1 Answer

Central lock key can lock but cannot open.When opening manually , it opens but sets off the alarm.


lock with the key and the alarm shouldnt operate ,suspect a fault with the key remote but cannot say for sure

Jan 19, 2015 | 2006 Volkswagen Polo 1.6

1 Answer

Central locking faults


computer problem. dealership only

Nov 12, 2017 | 2009 Ford Focus

1 Answer

Is there a reset for door locks


Have your central locking module checked by an auto electrician it could be fault or there might be a short circuit in the central locking circuit.

Mar 27, 2014 | 1998 Mazda 626

1 Answer

Use remote central locking after 20 seconds alarm goes off doe not do it all the time come back to vehicle and lcd says alarm activated check vehicle have checked that all doors are shut have even set...


sound like one of the door latch switches is faulty or the hood or trunk lid switches try the hood switch first thats the favourite suspect the security system thinks something is still open

Feb 14, 2018 | 2002 Volvo V70

1 Answer

VW Golf security/central locking overridden by another fob.


is a cheap alarm. change it wih a proper one.
both of you have alarms which is working on the same freqvency. the same alarm, or just weird coincidence.

Feb 27, 2010 | 2003 Volkswagen Golf

1 Answer

Central locking and windows unusable due to leak


I've been dealing with similar problems (windows and sunroof dead, power locks iffy, dome light doesn't work, random chiming) and best I can figure is:

a) get rid of the leak and any standing water
b) depending on the year of your car check the relays and/or central locking module

I spent a lot of time checking the ECU and door interior parts and those were both dead ends. I also thought the standing water on the floor might be shorting actual wiring, but now I've eliminated that as well. Although my alarm hasn't been going off, the "door chime" has and the instrument cluster sometimes shows 3 or 4 doors open while driving. VAG-COM showed some alarm trip type faults as well. Central locking is my next move when I've got some time.

Apr 02, 2009 | Audi A3 Cars & Trucks

1 Answer

Car alarm not activating central locking


It means that the remote is not passing the signal to the car . The alarm has triggered because the system has detected an illegal entry. Replace the remote batteries

Sep 10, 2008 | 2006 Mitsubishi Colt

1 Answer

I have a bmw 316ti compact on a 52 reg. The central locking gave up working 3mths ago and we was useing the key to lock and unlock the car,then all ov a sudden we couldnt start the car.when you put the...


with any BMW they have their problems, one is the central locking/immobilizer, the central locking is linked into the immobilizer and vice versa, the immobilizer takes it signal to disarm from the central locking and the ignition key ring. (chip in the key) if one of these starts to play up it has loads of consequences this being one of them. they all need to work together for the system to work properly. you would need to read the alarm and immobiliser codes using an ob2 tool that can detect them, and find the fault some problems it can be the drivers door sensor in the lock this is the main door as its drivers side and it controls all other doors on the central locking. if the switch is worn in any of it movements the system will not know the door has been opened, this does not work on the interior light as that is a switch in the door frame. the door lock is lock unlock and deadlock with key with remote fob its also arm disarm alarm and immobiliser. i have seen in some models there is a sensor auto lock so when you walk away with the key the doors lock automatically all lease parts work together. any one having a problem can cause no signal to be sent to the others in the system to start engine .

Jun 22, 2017 | BMW 318 Cars & Trucks

2 Answers

Help Please!!! Alarm problem.


Hi.
With everything connected and ignition switched on, check the supply area around the ignition switch. If there is power there, the alarm interrupts the supply after the ignition switch.

Next with ignition on, check supply at the coil input. If there is no supply there, route cable from ignition switched live to coil supply +ve. All other circuits should get this bridged supply and work normally.

Remove any sounder.

If this doesn not work, let me know and I'll go into more detail.

Hope this helps.

Jun 16, 2008 | 1988 Mazda 929

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

799 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...