Question about 2001 Lexus LX 470

1 Answer

NEED BULB I.D. AND INSTRUCTIONS FOR HEADLIGHT LOW BEAM BULB REPLACEMENT

Posted by TER HUNT on

Ad

1 Answer

ernesto cuadra

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lexus Master
  • 12,223 Answers

Go to www. advanceautoparts.com and get it
go to www.aa1car.com and get the topic and fix it.

God bless you

Posted on Sep 30, 2013

Ad

5 Related Answers

Anonymous

  • 99 Answers

SOURCE: Low beam, driver's side headlight

bulb but check all the fuses under the hood

Posted on Jan 26, 2009

Ad

Joe Hogan

  • 10865 Answers

SOURCE: how2 remove headlight to replace the low beam bulb on 2001 Lexus

Go to any autozone and they will help you replace it as long as you buy the bulb from them.

Posted on Apr 01, 2009

Joe Hogan

  • 10865 Answers

SOURCE: Low beam, driver's side headlight

The low beam bulb needs to be replaced. Go to an autozone store as they will sell you the bulb, and even assist you in their parking lot with installing it.

Posted on May 06, 2009

Anonymous

  • 4 Answers

SOURCE: HID low beam headlight replacement for 2003 lexus es300

The HID bulbs are very easy to change, and can be bought online for much less than from the dealer. Check sites like xenondepot and Ebay for Phillips D2R (for reflector headlamps) HID bulbs and you can replace them yourself.

Posted on Jun 06, 2009

mkv0525

Mike Vincent

  • 358 Answers

SOURCE: Changing 1996 Lexus LS400 headlight bulb.

you have to remove the head lamp. there are 4 bolts that hold it in. you will have to remove ouyer marker lens first.1 screw on top and pull forward. clips hold lens pretty tight.

Posted on Jun 16, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove halogen low beam head light to replace it?


Removal & Installation To Remove:
WARNING
The halogen fog light bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope.
NOTE: The headlight bulb should not be removed from the headlight assembly until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlight bulb performance. Contaminants may enter the headlight assembly where they can settle on the lens and reflector. Never turn on the headlights with the bulb removed.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section. NOTE: Make sure that the headlight switch and the ignition switch are in the OFF position.
  2. Remove the pin-type retainers, screws and the air deflector from the radiator.
  3. Remove the three bolts and the headlight assembly.
  4. Disconnect the electrical connector.
  5. Remove the cover from the rear of the headlight assembly.
  6. If equipped with HID, release the spring tabs to remove the low beam bulb, otherwise disconnect the electrical connector and remove the bulb.
  7. Disconnect the electrical connector and remove the high beam bulb.
HID low beam headlight bulb lin_tc_0085.gif

Standard low beam headlight bulb lin_tc_0086.gif

High beam headlight bulb lin_tc_0087.gif

To Install:
  1. Place the headlight assembly in the proper position.
  2. Install the cover from the rear of the headlight assembly.
  3. Connect the electrical connector.
  4. Install the three bolts and the headlight assembly.
  5. Install the radiator air deflector.
prev.gif next.gif

Dec 18, 2010 | 2003 Lincoln Town Car

1 Answer

How do i replace a low beam head light on a 94' camry ?


Things You'll Need:
  • #H11-55W and #9005 replacement bulbs (low- and high-beam bulbs for 2007 and later models)
  • #9006 and #9005 replacement bulbs (low- and high-beam bulbs for 2002-2006 models).
STEPS TO REPLACE HEAD LIGHT: Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off. Open the hood using the primary and auxiliary hood release latches. Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced. Turn the headlight bulb socket counterclockwise to remove it from the assembly. Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.

Dec 05, 2009 | 1994 Toyota Camry

1 Answer

Low beam, driver's side headlight out. Bulb, fuse or entire apparatus replacement? I have the same problem, low beam, driver's side headlight is out but I can't figure out how to get the bulb out to...


The low beam bulb needs to be replaced. Go to an autozone store as they will sell you the bulb, and even assist you in their parking lot with installing it.

May 06, 2009 | 2004 Lexus ES 330

1 Answer

2005 Honda CRV High Beam


Honda Headlight Bulb(H1) - This bulb is the high and low beam bulb for your vehicle. One bulb required for each headlight.

This headlight bulb fits:
  • CR-V 2005-2006 (requires 2 bulbs per side)

Mar 21, 2009 | 2005 Honda CR-V

2 Answers

Headlight repair on 2003 Mercedes Benz E320


how do you change left low beam bulb on 2003 mercedes e320

Mar 15, 2009 | 2003 Mercedes-Benz E-Class

1 Answer

How to replace low beam bulb on 2004 baja


I was able to locate an owners manual for the vehicle. The large plastic weatherguard protecting the headlight bulb connections needs to be rotated CCW about 90 degrees, and removed to provide access to the bulbs. Then remove the center connection for the low beam and release the spring clip retainer to release the low beam bulb. Replace with new bulb and reconnect/reinstall retainer clip, center connector wire, and weatherguard. Note that this is the procedure for the Turbo Baja...non-Turbo model is different.

Jan 02, 2009 | 2004 Subaru Baja

1 Answer

Driver side Headlight Replacement


I am car stupid. Just following the instructions in the owners manual, I was able to replace my low beam driver side bulb in less than a half hour. Only one tip. When it says pull straight up on the tab, definitely oil it first. I snapped the tab off and cut myself because it didn't have enough give.

Dec 18, 2008 | 2002 Chevrolet Malibu

1 Answer

99 VW Passat. Low beam headlight not working.


you need to change the bulb an your local parts store will show you how

Nov 26, 2008 | 1999 Volkswagen Passat

1 Answer

2001 Infiniti QX4 low beam bulb replacement instructions


Look directly behind the headlight box if there is a rubber sleave covering the plug take it off. Unplug the wires from the bulb, there may be a saftey clip you will have to pry up to get it off.after you get the plug off the bulb holder should twist counterclockwise then it will pull right off.When you change the bulb just remember to wipe your body oil off the bulb before attaching it back into the headlight box. Then plug it back in and your in business. The high beam has three wires and the low beam has two wires. The bulb will have to be the right one.
God Bless You Greg

Nov 25, 2008 | Infiniti QX4 Cars & Trucks

Not finding what you are looking for?
2001 Lexus LX 470 Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Mike

Level 3 Expert

4372 Answers

Brad Brown

Level 3 Expert

18563 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...