Question about 1990 Daihatsu Rocky

Daihatsu high beam doesnt work - 1990 Daihatsu Rocky

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

High beams work for both lights, 1 low beam does not

Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?

May 31, 2015 | 2006 Mazda Tribute

1 Answer

High beam headlight relay located

there is a fuse for that circuit in the fusebox lower dash if this is ok check that your getting power to the high beam wire at bulb holder if not the part of switch for high beam isn't working if are getting power check the bulb holders for warping etc as can get very hot and mishapen so that the bulb doesnt always sit on the contacts but if bothe lights out i'd think its a power supply problem

May 01, 2014 | 1995 Subaru Impreza

1 Answer

2007 jeep compass low beam doesnt work

Check the fuse for that side yes you have a fuse for each high and low beams for each side

Mar 26, 2013 | 2007 Jeep Compass 2.4

1 Answer

Low beams

the low beams go threw the switch also and that side of the switch burns out

May 12, 2012 | 1987 Dodge D150

1 Answer

My high beams work but low beams 1 is not working

Check the headlight relays- your owners manual will show you where they are.

Mar 11, 2012 | 1995 Ford Explorer

1 Answer

High beam works low beam doesnt on on side on other low beam works and not high beam

Check bulbs and replace if nessasary. Always replace in pairs with quality bulbs.

Mar 06, 2011 | 2002 Oldsmobile Intrigue

1 Answer

Golf low beam doesnt work but high beam does high works on both settings

check fuse first, then, fit new bulbs,then, if that dont work, fit a new column switch arm.(high beams have a relay,low dont.)

Jul 26, 2010 | 1995 Volkswagen Golf

1 Answer

Low beams doesnt work but high beam does

my friend ! is both beam wont work on low? if yes then check fues other wise some time its burn .so check it throlly ur car beams ....some time lights assambly have problem .so check that as well.
hope u ll get the soloution ....tc

Mar 12, 2010 | 2006 Pontiac Grand Prix

1 Answer