If I undersatng your question, the oil is picked up by the oil pick up under the oil pump inside the oil pan, then t goes inside the engine block casting, that has several lubrication galleries running paralell to the crankshaft and the camshaft. the head has some oil passages to let the oil drain to the pan, and tha completes the flow.
SOURCE: check engine codes for 1991 Dodge Spirit LE
Turn key to on, then off, then on, then off, then on & leave it on, (not start, just to on) then count the number of flashes of check engine light. It will flash,then have a small pause, then flash again. It will be a 2 digit number, for example: 2 flashes, pause, 2 more flashes, will be code 22. 3 flashes, pause, then 5 more flashes would be code 35. When you get 5 flashes,pause, then 5 more, That is code 55 which just means end of message. Get back to us with codes & we'll advise of what to look for.
SOURCE: HOW MUCH DOES IT COST TO REPAIR A IGNITION SWITCH
Flat rates can vary from $70 an flat rate hr. to $125 per flat rate hour depending on the state that you live in; however, a flat rate hr is the time that is allowed for the repair. That job should be rated at about 1 1/2 hr +/- an hr. to complete plus the cost of the part. Whatever the flat rate would cost...no matter if the mechanic takes 5 hrs, the cost should not exceed whatever the flat rate has been estimated to be, so get the estimate first before having the work done.
126 views
Usually answered in minutes!
×