SOURCE: 1986 chevrolet el camino ss front bumper
I think the beat soultion is to go to a mechanic and take advice from him.
SOURCE: rewiring 1959 chevy el camino
Are you needing advice, links, tricks, or all of the above?
If it's advice you want:
If you are not buying an after market harness and all of the oem wiring is intact replace one wire at a time from the component all the way back to the fuse box. Its tedious but, it's a sure fire way to get it right the first time.
Secondly, I'd by a haynes manual or some other wiring diagram. Study it for at least a couple weeks or until you are completely comfortable taking on the task.
Color code your wires and label both the old and new ones with paper tape and a permanent marker so that you know what each one is for.
Last but not least, make sure that the battery is disconnected... ;o)
SOURCE: Will a 700r4 fit into a 87 el camino without
It depends on what the 700r4 came out of. Different vehicles had different length tail shafts. The best thing to do is to measure the length of the two transmissions. You should be able to get a driveshaft shortened for around $150 if you need to do it. Also don't forget to get the vacuum-electric switch and harness for the trans, on the firewall by the heater box.
This will really make a difference in your mileage so give it some serious thought. I replaced a Turbo350 with one and my weekly gas bill went from $100 to about $65-$70. Hope this helps.
SOURCE: 86 4.3 litre V6 chevy el camino bogging down, stalling out
most likely a weak fuel pump or a clogged filter. Check fuel pressure with a gauge or as its bogging down spray brake cleaner in the Throttle Body. If this allows it to increase RPM then its the pump or filter.
Testimonial: "Thanks for the imfo, your the second person that said that"
SOURCE: looking for vacuum diagram of a 305 chevy el camino
OBVIOUSLY U HAVE FOUND THE DIAGRAM U NEED. TAKE IT TO A PRINT SHOP AND HAVE THEM ENLARGE THE DIAGRAM SO U CAN SEE IT.
259 views
Usually answered in minutes!
×