At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I want to change the gear knob on my 99 deawoo lanos...
Look at it really close there should be a small set screw on the side of the knob make sure you have the right size allen before you try to take it out
i have had some you had to push in on the button and hold it and try pulling up on it at the same time becareful if it does not come off.i have had some you had to push in on the button and hold it and try pulling up on it at the same time becareful if it does not come off.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi the A16DM Lanos engine has hydraulic valve lifters , the clearances are thus automatically adjusted , make sure the lifters are bled and primed before installation , inspect the camshaft for wear as wear in this area would result in tappet noise .
As long as it does not slip (eng speeds up, but car doesnt) you MAY have a clutch hydraulic problem. Ck that first. If the clutch hydraulics are OK then the only thing that could do that it a pilot bearing bad (seizing) but I dont think that is your problem.
THANKS BUT I LOOKED THERE IS NOTHING THERE BUT IF YOU HAVE ANY MOE IDEAS
×