Question about Jeep Wrangler
Posted by Anonymous on
tighten with a rachet and a decent socket with the shape of the nut in the end ,tighten to about a grunt and a slight arm muscle strain which is about 50lbs ,in two staged in the book it says 22nm +90? which to me is a load of hog wash ,make sure the shell with the hole in it for the oil spray is in the top con rod end and bit of grease in their as well before you fit the bottom one then a pull down first time with a rachet to firm pull then the second pull ,then turn engine over to make sure its not locked up then do the next one ,the lips in the shells that hold the shell inside the caps normally go together on one side and the con rod oil spray hole should spray towards the thrust side of the piston .
Posted on Feb 25, 2012
Check this web page and double check to make sure that I entered in all the correct information. *** http://www.torkspec.com/torkspecme.aspx?KI=69-4.2L-258ci-S6
You can find just about all of the torque specs that you should need here. Also you might want to order yourself a Chilton manual. They usually have all of the specs in the back of the book and throughout the different sections.
Posted on Mar 29, 2012
Tips for a great answer:
Oct 27, 2016 | Volkswagen Golf Cars & Trucks
Mar 07, 2016 | Cars & Trucks
Aug 18, 2015 | Toyota Cars & Trucks
Mar 18, 2010 | 1988 Jeep Wrangler
Oct 07, 2009 | 2004 Dodge Ram 1500
Nov 15, 2008 | 1984 Dodge D150
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: