Are you certain it's getting gas, does it smell flooded?
Pull one of the plugs, see if its wet after cranking.
Ground plug and check for spark, if no spark, problem could be crank sensor or coil packs.
SOURCE: I need a free owners manual for a 2000 chrysler 300M
There will be a few minor differences between the 2000 and 2004, but for the most part, you can use the 2004 manual as a reference. Since it is illustrated, you can confirm visually when you are taking on repairs. I have owned a 2000 300m for several years. Might I recommend you visit 300mclub.org? I am a member there and have learned a ton about 300m's.
SOURCE: 1999 chrysler 300m wont crank, code P0340
Sounds like the timing belt broke. Unfortunately this vehicle was not equiped with no contact valves so if that is the case you will need to have the engine and Head rebuilt. If the crank position sensor can't sense the position of the crank it should shutdown the electrical to keep you from damaging your engine.
503 views
Usually answered in minutes!
×