Question about Mercedes-Benz CLK-Class

Open Question

Parking brake mercedes

Had to stop quickly yesterday parking brake signal and beeped ever since:( is there a reset button? clk430 2002

Posted by Anonymous on

Ad

1 Related Answer

Anonymous

  • 1 Answer

SOURCE: Parking Brake Alarm

inset the key and switch on to position 2
Scroll through the warning display untill you get the service indicator apears
Press and hold the reset button on the left of the dash apnel for about 4 mins
You will be asked if you want to reset
Press anh hold the reset button again until you hear an audible warning
It should now show the new interval to a service

Posted on Apr 06, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to stop beeping


Sound sleek you have two problems. Check your brake fluid level immediately for the beeping and brake light on!
The check engine light is a completely different story.
I recommend you take it to a shop.

Aug 23, 2014 | 1998 Mercedes-Benz C-Class

1 Answer

When I turn the ignition switch on I often cannot get the stick shift to come out of Park. If I shift it out quickly it will often work but if I leave it to idle in Park for more than a few seconds it jams...


The ability to release the shifter from the Park position depends on the brake switch. You have to put your foot on the brake to take it out of park. You may have an problem with your brake lights as well. Have a friend look at your brake lights the whole time you have the pedal depressed and make sure they stay on. If they go off then the signal to release from park is stopping also.

Aug 16, 2014 | 2008 Ford Escape

1 Answer

Parking Break Censor Will not stop beeping!


Hi. Which model? On the earlier models, the park brake light is also the brake fluid light. If the fluid is at min then the light comes on when the fluid sloshes around the resevoir. Topping up the fluid solves this.

Mar 15, 2014 | Volkswagen Passat Cars & Trucks

1 Answer

1989 chevy have brake lights when park lights are off but when park lights are on have no brake lights pulled the light cover off noticed that the middle buld was on which is for stop, tail, an turn...


Check the brake light switch on the brake pedal. Sounds like it slipped out of adjustment. When pedal is depressed, the button on switch will extend and be on to pass current to the bulbs.
Also, you need to figure out the tail lights: those two filament bulbs are for park lights and for brakes/turn signals. One filament is for the parks, the other filament is for both brake and turn signals. American cars have the brake lights wired through the turn signal switch- from the brake light switch on the brake pedal to the turn switch, and then out to the rear bulbs for brakes and, or turn signals.

Feb 11, 2018 | 1989 Chevrolet K1500

1 Answer

Car started beeping when driving down road


the beep beep is telling you that your parking brake is still on.
if the abs red light is on get it fixed, like, yesterday.
what price safety........

May 20, 2010 | 1997 Buick Riviera

2 Answers

After flat tire, tire pressure warning will not go out even after making sure pressure is at 44psi. How do I reset dash?


44PSI?? is that what your car recommends...


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

Aug 14, 2009 | 2006 Hummer H3

2 Answers

Location of computer connection in 2006 XJ8L


Hi.
Try disconnecting the battery for a few minutes ,to reset the computers memory, and reconnect.
I have had a few cars with this problem, and its the "gremlins" as I call them, giving you false signals, usually originating when battery is flat.
Good Luck.
John.

Jan 14, 2009 | 2006 Jaguar XJ8

1 Answer

Parking Brake Alarm


inset the key and switch on to position 2
Scroll through the warning display untill you get the service indicator apears
Press and hold the reset button on the left of the dash apnel for about 4 mins
You will be asked if you want to reset
Press anh hold the reset button again until you hear an audible warning
It should now show the new interval to a service

Jun 13, 2008 | 2008 Mercedes-Benz Mercedes Benz C Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

jalal

Level 2 Expert

178 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...