Is the Daewoo Leganza and the Nubura 2Ltr Engine the same?

what about a crank pulley,or any other pulley bear a bend damage and on rotation cause the vibration?

http://www.tradebit.com/filedetail.php/189127366-daewoo-leganza-service-manual

the thermostat is behind the front engine cover and you will also need to remove the timing belt to get at it ,the temperature sensor is on the cylinder head but i cannot remember exactly as i get confused between this vehicle and the opel astra model which is the europeon version or a vauxhall in the UK or a holden down under

Please see my tip at http://www.fixya.com/cars/r5932051-check_engine_light_check and let me know if you have questions.

U NEED TO REPLACE THE CLUTCH PLATE MOST LIKELY

chilton makes a great bible for your car
chspters indago carry a great one

usually under the hood there is several metal plates rivited to the bulkhead.....paint number...chassis number...and engine number...they will be marked accordingly

@ junkyard or...onlineparts.com.

if u need new engine 2.2 would require computer, harness and not sure about trans its not worth it stick with original size if car still cranks/turns motor may still be repaired but if u cant turn crank shaft its done. check oil condition and level also might be good idea to inspect timing belt and tensioner may not have been adjusted or installed correctly also may now have a bent valve. when u know what ur in for then make decision weather to fix or scrap/donate

hi there don't know if this will help you but i know that daewoo was taken over by chevoilet(excuse my spelling) your local dealer might be able to help you i'm from the uk & thats what happened here hope this is help to you.