Code p0700 & p1776 mafg. control transmission ?
(DTC) CODE # P0700....Transmission Control System (MIL Request)
Translation: Transmission Control Module (TCM) Malfunction or Failure.
P0700 Information Code
The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM.
This code is for information ONLY. If this code is present, check for transaxle codes.
P1776:
Solenoid Switch Valve Latched in Low/Reverse Position.
The TCM monitors the L/R solenoid to ensure that the fluid transfer happens. It uses a Pressure switch to verify this. Usually this code is set by a switch that is stuck or a solenoid that is not mechanically operating.
A transmission shop would be better suited for this type of work.
3,460 views
Usually answered in minutes!
×