Question about Chevrolet HHR
Posted by Anonymous on
I just got the code for my radio by calling 1-800-537-5140 and choosing the option for my vehicle make. 1 for chevrolet. then i entered 106010 for the customer # and then entered my serial # from the stereo and it gave me a lock code for free. Now i am just trying to figure out how to enter it since my manual tells me to take it to the dealership. Now that you have your 4 to 6 digit code, you can enter it by following the these steps. 1. Make sure your ignition is in the "on" position, but no started. 2. Press/Hold the "HR" button to set the first 2 or 3 numbers. 3. Press/Hold the "Min" button to set the next 2/3 numbers. 4. Press the AM/FM button one time. "SEC" should be displayed. You can now turn the radio on. Good luck!
Posted on Oct 28, 2009
Check the radio fuse. As unusual as it seems, GM has started having the radio (even though not turned on) generate the chimes and turn signal sounds. If the radio fails, all the chimes fail too.
This applies to other vehicles besides the HHR. My 2003 Silverado had the door chimes fade down so I could barely hear them. The fix was to replace the radio (under warranty, fortunately...).
Posted on Mar 22, 2010
There isnt a code that you can use to unlock the theftlock device in GM stereo units. You must take the vehicle to a GM service department and they will have to unlock it for you using a scan tool.
Posted on Feb 05, 2011
Tips for a great answer:
Dec 11, 2015 | 2007 Chevrolet Chevrolet HHR LT
Dec 06, 2010 | 2007 Chevrolet HHR Panel LT New Cars
Mar 10, 2010 | 2007 Chevrolet Tahoe
Feb 18, 2010 | 2006 Chevrolet HHR
Nov 09, 2009 | 2006 Chevrolet HHR
457 people viewed this question
Usually answered in minutes!