- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have a short circuit in your horn button causing the
fuse to blow when you press the button or in the horn itself.
1. Locate the horn under the hood normally in the front of
the engine compartment.
2. Once you locate the horn, disconnect the wire from the
horn.
3. connect a VOM (Volt Ohm meter) to the horn's wire.
plus(+) side to the wire and negative (-) side to ground
or some metal part on the car.
4, set the VOM to dc voltage and have someone press the
horn button. You should read 12 volts on the VOM, if
not you have a short in the horn button, if you do mread 12 volts
you have a short in the horn. Replace the horn....
×