There is an accelerated clicking/knocking noise when i start driving my hyundai elantra 2000. I can turn the car on and even press the gas while in park and everything is ok. But as soo as i put in gear AND start to accelerate the clicking starts and increases the clicking noise derastickly...Advise on wht would be the source or problem?
Sounds like your CV joints are worn out. If the clicking noise gets worse when turning then its a definite possibility. Also check the CV joint boots for splits as this can quickly wear them out. The dust mixes with the grease to form a grinding paste.
2,470 views
Usually answered in minutes!
I have check the follow and is non of those things. I can put my car in reverse, pull out of parking place, then put it in drive. I will accelereate to about 5 mph to bout 15mph, between those speeds the problem happens. a clicking/knocking noise that accelerates as i do. Now i can start accellerating slow then hit the gas fast then release and the clicking accellerates real fast and keeps going, then climbs back down.
The noise comes from the front of the car.
No sound doesnt change when turning...just acceleration or staying at some kind of speed. If it was a cv joint how would i get that checked out or fixed?
u have to jack car check for looseness on cv axle joints at tranny and at steering knuckle!but from description of noise seems to be in driveline,could be minor or not,have it inspected !
could be cv joint,does sound get worse when turning?
does noise seem to come from1 side of the car ,frt or back?
can be lots of things! description is vague,start by checking under car and around wheels inner fenders to see if something is dragging or caught that would make noise!
×