TRANSMISSION HAS NO FOWARD OR REVERSE GEARS WHEN PUT INTO GEAR,I DROPPED PAN AN NO METAL FRAGMENTS WERE FOUND IN BOTTOM OF PAN EITHER checked both axels an there fine an also checked to make sure the drive shaft coupleing was together going to tourque converter,what can cause it not to move

SOURCE: NO GEARS

i think you mean bleed the slave cylinder first. does the clutch pedal have any resistance? Goto www.clarks-garage.com and see if you find what you need. That site is awesome for fixing any 944.

Jim Goldsmith

• 2005 Answers
• Posted on Apr 28, 2009

SOURCE: automatic transmission< while in drive wont shift

change your transmission filter: no or, very little movement and, no shifting indicates a clogged hydrolic circuit
do not continue to drive your car at that rpm until you fix this as engine damage can occur

Colin Stickland

• 22516 Answers
• Posted on Mar 23, 2012

SOURCE: 04 cayenne transmission rebuilt but car does not move on drive or reverse

Does it have enough oil in the gearbox ,these newer motors have a special filling procedure from the bottom ,their is no dipstick and a level tube in the bottom of the box whereby its filled then the usual dealer software to programme the box and then its refilled again if needed ,if the transmission fluid is low it shut the box down via the computer ,come across before on later VWs with auto box and i filled one through the breather till the level appeared correct for the amout of fluid ,although i couldnt tell as this plug lets the oil out and you need a special tool for this which isnt sold only to dealers ,i made mine from a big piece of cork but ? Still wouldnt work as the computer went into protection mode .So i gave up and it went into dealer for a bill and a half usual story this and that was wrong and a new gearbox needed as no spare parts sold seperatly and all i done was to drain the oil to change it what a rip off