SOURCE: 7.4 liter mpfi engine starts, then shuts down.
The oil pressure sending unit should be located behind the distributor way in the back angled away from the engine, fuel filter been changed?
www.aceautomotive1.com if you findd this information helpful please give me a good rating
if you like i can email you a diaggram and location of the sensor you need
my email: [email protected]
SOURCE: 98 blazer stalls
It could be your fuel pressure regulator, check this link for details:
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528022b9c4
That's what it looks like.
SOURCE: i CANT GET MY 05 impala to hold fuel pressure a
sounds like #1 injector is stuck open
unbolt the fule rail lift it up and turn the key to run and see if that injector is leaking
SOURCE: truck just cut out like not getting fuel i have 60
Well 60psi is definately good. Have you tried replacing the fuel filter? Its possible it is just plugged up really bad.
SOURCE: 1999 chevy suburban 5.7 L. vortec. Can a bad
i do believe it will not start with out it if you can hook up a scan tool to it crank the engine and look at rpms while cranking should read about two hundred forty rpms thats what fires the injectors the cam sensor tells the computer what cylinder is ready to fire next also scanner will set the cam timming.
Testimonial: "Excellent answer to my question. Thanks alot."
84 views
Usually answered in minutes!
×