Your ignation key barrel is worn out and it's probably staying on the on position or neutral all the time.
check the connections on the column
I’m happy to help further over the phone at https://www.6ya.com/expert/daveed_0c68852e3be17295
SOURCE: Hyundai Sonata 06 engine runs key out ignition in off position
car should be under warranty .. try having a new key made .if that dosent fix it. it's in the key lock maybe a wire loose .
SOURCE: Key stuck in ignition of 2002 chev. trailblazer
Check your ignition fuse under the drivers rear seat.
SOURCE: Ford 1995 F150 Truck. Turn ignition key off but Truck still runs
ignition switch electrical portoin above brake pedal on steering column
shack
SOURCE: key stuck in ignition halfway to ACC position and will not turn
try wd40 and shaking the key, what happens is one of the tumblers get stuck and wont let the key turn if that dosnt work let me know worst case you will have to replace the ignition its about $35 to $40 and a few hours.
SOURCE: My key is stuck in the ignition. Won't lock.
Have you tried depressing the " Brake pedal", turning steering wheel to centre position and then placing lever into PARK, before attempting to remove key?
Scott
67 views
Usually answered in minutes!
It's been a day since I posted my question. I have browsed the internet & found several forums, etc. about the same issue. I've found that the "ignition acuator" is what provides the resistance when turning the ignition key. So, I tore down the steering column on my dads truck & found the "ignition actuator" broken in two different places. I still have to finish getting the old one out, but, I did find the problem.
I now have my dads truck fixed. I put in a new "ignition actuator". I had issues getting the key cylinder, gear, actuator gear mechanism, and ignition switch to line up correctly. Everything has to be exact for it to work right. The ignition actuator had broken with the ignition switch in the "run" position, which allowed it to be started by popping the clutch. It is fixed & starts now.
×