SOURCE: Looking for the fuel filter in a 2005 mazda 6
It is attached to the fuel pump. Both are located in your fuel tank.
SOURCE: serpentine belt diagram mazda 6 2005
Here are links to the diagram...
If your engine is the 2.3L 4 cyl... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7042
If your engine is the 3.0L V6... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6036
SOURCE: 94 mazda B3000 3.0L cylinder head torque specs
Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds
Use torque sequence below
SOURCE: 2003 mazda 6 3.0 need the main bearing torque specs
I'm sending you the torque specifications for your main bearings and also your head bolts. I also sent you main bearing and cylinder head tightening sequence. I hope this will be useful
Main Bearings Torque specs. 40-43 Ft. Lbs.
Cylinder Head Torque specs. 56-60 Ft. Lbs.
Testimonial: "thank you so much! couldnt find this information anywhere, even called the local mazda dealers!"
SOURCE: I need the 2003 Mazda
Fig. Loosen the remaining camshaft cap bolts using this sequence-2.3L (KJ) engine
Fig. Tighten the camshaft cap bolts using this sequence-2.3L (KJ) engine
1,027 views
Usually answered in minutes!
×