Valve cover torque specs

It is here and note they are INCH pounds not ft lbs.

https://www.google.com/search?q=2006+Hyundai+Tucson+V6+torque+specs+for+valve+cover

Valve Cover Bolts Torque Spec

Hyundai Forums
https://www.hyundai-forums.com > threads > valve-cov...
Jun 6, 2016 - If the specs are 72 - 84 inch pounds, i always use the lowest value, especially in aluminum. If you use a new gasket and clean the mating ...

Replacing Valve Cover Gasket - Hyundai Forums
Dec 9, 2007
Valve Cover Replacement Specifications - Hyundai Forums
Aug 24, 2012
torque specs ' Hyundai Forums
May 11, 2015
Valve Cover Torque ' Hyundai Forums
May 21, 2023
More results from www.hyundai-forums.com

..

In the link and a video as well. NOTE: they are POUND INCH not Foot Pounds.

Torque Pattern for Valve Cover? - Kia Forum

kia-forums.com https://www.kia-forums.com > threads > torque-patter...
Sep 17, 2013 - show the locations of the bolts on the "Cylinder Head Cover" --aka valve cover-- and they provide the torque at 35-52 lb-in (4-6Nm), but they ...

Valve Cover Gasket help
Apr 28, 2012
Torque specs and sequence for intake bolts
Jul 10, 2022
Need Bolt Pattern for Valve Cover, please help?
May 15, 2018
torque specs?
Mar 20, 2017
More results from www.kia-forums.com

..

The torque specification for the cylinder valve cover stud/bolt on a 2007 Honda Accord 2.4L VTi is 7.2-8.1 lb-ft (10-11 Nm).
As for replacing the broken stud, it depends on how the broken stud is located and the extent of the damage. If the broken stud is easy to access, it may be a simple matter of unscrewing the old one and putting a new one in with the correct torque specification. However, if the broken stud is difficult to access or if it has caused damage to the threads, it may require a more complex repair. In some cases, it may be necessary to drill out the old stud and tap new threads or to use a helicoil insert to repair the damaged threads.
It's important to note that over-tightening the valve cover bolts/studs can lead to damage or deformation of the valve cover or gasket, and under-tightening can lead to oil leaks. So, it's crucial to torque the bolts/studs to the specified torque value.

valve cover gasket torque spec? - Bimmerforums

www.bimmerforums.com/.../showthread.php?...valve-cover...torque-spe...

Dec 7, 2012 - Remember the little rubber grommets around the cover bolts? ... Location: alabama; Posts: 5,537; My Cars: 2002 bmw 325 ... Torque spec for the M52 valve cover bolts is 89 inch-pounds / 7.4 ... 1976 - 1989 (E24) · 2004+ (E63, E64) ... 2012+ X1 (E84) · 2003+ X3 (E83,F25) · 1999+ X5, X6 (E53, E70, E71). Valve Cover Bolt Torque Specs
Oct 25, 2014
Valve cover screw torque specs?
Nov 9, 2012
leaking valve cover gasket
Dec 29, 2011
How specific for torque specs?
Dec 27, 2011
More results from www.bimmerforums.com

Here's a link on your valve covers. Repair Guides Engine Mechanical Components Valve Covers AutoZone com Here's another link Matt on relieving the fuel pressure. Repair Guides Relieving Fuel System Pressure 2 4l 3 3l 3 8l Engines...

Valve covers and pans are really light, you use inch pounds and the spec is 5 to 12 inch pounds.

The torque specs for a Kia 1.8 valve cover is 43-78 inch pounds...... Basically just snug....

head bolt torque 125 ft Lbs. do it in two steps and lube threads on bolts.

valve cover torque 70 in. Lbs.

Buy a gasket kit for the upper end. Remove the valve cover intake and exhaust manifolds. Remove the head bolts. Remove head and clean up block from old gasket material. Take the head to a machinist and make sure that it is not warped. If it is warped either replace the head with a new one or have it machined true. Install new gasket and get torque specs with new head bolts and follow torque sequence using the correct torque specs. Clean exhaust, intake and valve cover of old gaskets. install new gaskets and torque according to specifications.

not sure there is such a thing. I've never seen anybody use a torque wrench on valve cover bolts. Just use a nut driver (screwdriver type) or a 1/4 inch drive ratchet, and tighten as much as you can. They don't need to be very tight.