Code navigatie I don,t have the code for nav plus

If you're finding it difficult to service/repair your car, get one of those online manuals. You'll not have to wait for others to answer, or rely on mechanics and all. Plus i know a website that has very good manuals online, without expiry i.e. for lifetime.

www.reliable-store.com

1999 2006 CHEVROLET SILVERADO GMC WORKSHOP SERVICE REPAI


for easy and best solution click the link

English please. what year/,
here i will use google translate feature, to do your post.
"As I can unlock my browser acuara"
google messes up, this, NAVAGATOR.
so i think your post is
My Nav died, (muerto)
NAV asks for CODE, the secret code.

this is because you failed to write the code down to paper.
operators guide tells you to do that , 1st day of ownership
so now code is lost "antitieft code"
only the dealer can fix it.
or any licensed locksmith,(call them)

use google to translate that to spanish please.
its posted here 25 times now, RADIO and NAV codes locked out.

i guess you lost your operators guide already? ?????
maintenance minder, or CEL/SES/MIL?
all are service but all are different.
the wrench light is probably oil change reminder, (?????)
the oil change reset is in the linked oper guide below on page.307
the icon of an engine is the CHECK engine light , or CEL.

CEL
all USA cars? and most 2006 plus cars world wide (not china)
reset with a generic scan tool , press button.
there are 3 ways on all cars.
1: scan tool reset. (best of best) $9 tool
2: pull ECU memory fuse, (RTM read the FSM)
3: pull battery neg lug , step on brake pedal , and wait 5min and put back. this kills all power to car.
the operators manual warns you, pulling battery and not reading the radio and NAV sections of same , you will lose the RAD CODE and NAV code, bricking both.
so read the manual in the glove box and back up your 1 or 2 codes
if you have NAV.
there may be a 4 th way some cars have driver reset, silly way.
fidding knobs, and keys and odometer resets, this is car maker
and year,specific , and i ignore it, as i have 8 scan tools.
but read the operators guide on all 3 topics.
ive post the free accord link 25 times. now.
here it is 1 more time.
RTM, read this first then ask questions.

http://hondatech.info/downloads/Auto/Manuals/Accord/


the oper guide shows no way to reset the MIL.
(other than a real scantool) only the FSM covers the other ways.

you must return you car to the store where you buy the sat nav, for update and revision again. something is missing or bad installing.
God bless you

go to the supplier sat nav, and get the revision, they have support for the customer, and wait for fix it , from them. relax.

God bless you

check all your fuses and relays could also be a short in a wire somewhere.

Thanks for choosing FixYa and welcome to the site. The alarm is what is causing the vehicle to not start. You may be able to pull the fuse for the alarm to get it started. There should be a code that can be entered to reset the alarm. Check your owner manual. If not, you may have to contact the dealership to get the code to reset the alarm. Try not to use your key fob to unlock the doors as this will only keep the alarm on. I doubt anything else is wrong with the vehicle. The security alarm will kill the vehicle and cause this. If the fuse doesn't work, you need that code. You may be able to take off the hot side battery post for a few minutes and reset everything. Once you do, don't use the key fob for nothing.

Insert key don,t touch brake/clutch pedals
Press start button
Use scroller on top of indicator stalk,push up/down utill you find reset
When you find it press and hold button on end of stalk
You will see reset
This is for 3 series without sat nav,if you have nav re post as it is a different reset

i found a shop that can finally decode my audi navigation plus an only charged £50. not even the dealers can give you the code
the address is
Tech 2 Car Audio Repair Centre
322 Hobmoor Rd
Small Heath
Birmingham
B10 9HJ
Tel 0121 785 1700