Can not get the car to go into gear in 1st thru reverse. To get the car in gear you have to shut off car then put it in gear. What would the problem be and how difficult would it be to fix it myself?
Does that have a hydraulic clutch pedal or is it mechanical.If you don't know if you pump the clutch pedal about 10 times and you feel it getting harder and you can then put it into gear its hydraulic.Check under the hood on the drives side by the brake reservoir and you should see a little like see through little reservoir with a black cap or rubber cap..Pop that of and see if that is full.If its not than you have a leak in the hose that goes down to the slave cylinder or the slave cylinder is bad..You can look in front of the trans at the bottom as maybe see the leak if one..You can put some brake fluid in that little reservoir.Fill it up the pump your clutch pedal a few times to see if that helps putting into gear while car is running.If all that checks out.Your more than likely going to ned a clutch installed...
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589
1,190 views
Usually answered in minutes!
Thanks for a help!
×