Hows it going. The problem is I got a Plymouth Voyager sitting in my Driveway but I can't start it. I installed a new computer, but it still didn't work. I was advised by a close friend of mine that it has something to do with the security "thing". Sorry i don't know the exact term. I took apart dashboard and found a blinking red light. But the problem is i don't know how to disable it. Can you please help.
SOURCE: 1999 Plymouth Voyager 3.3L brake light
Check the brake pads must be worn out .....
Good luck...
SOURCE: 97 Plymouth Grand Voyager dash board probleme!! Please HELP
With all those problems, it is most likely a body control module gone bad. You would have to take it to a Chrysler dealer to verify.
SOURCE: dashboard gauges out
There was a recall years ago on the ignition switch. Something wears and causes the switch to catch and hang a little so it doesn't spring back all the way to run position. The car runs but some of the other contacts are out of line or something. On mine it only happens occasionally and if I nudge the switch backwards just a little bit the dash lights and everything start working as it should. Or just shut it off and restart. Or go ahead and replace the switch itself.
SOURCE: 1998 plymouth voyager gauges on dashboard not
well start by checking all fuses but it sounds like a bad ground wire somewhere on the car
117 views
Usually answered in minutes!
×