Need the correct torque specs for 2004 silverado 1500 calipers

SPECS???? ON A CALIPER...NO,NO,NO! CALL DEALER

Here are the torque specs you seek:
• Caliper mount bolts are to be set at 74 ft-lb
• Driveshaft axle nut should be at 177 ft-lb
• Hub and bearing mounting bolts should be at 133 ft-lb

2010-2017 Equinox

FRONT brake caliper BRACKET bolts Torque is 140 FT/LB and Caliper to the bracket is only 20 FT/LB.

REAR brake caliper BRACKET bolts Torque is 92 FT/LB and Caliper to the bracket is 20 FT/LB.

Remember rear bracket torque is different so don't forget as many DIY mechs snap that rear bracket bolt.

Use Thread Lock on caliper BRACKET Bolts.

Hello and welcome. here is the torque specs for the bolts.

Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
caliper brake bracket bolts torque to 180 n.m or 133 ft.lbs

31 ft lbs for caliper to bracket, then caliper bracket to nuckle is.148 ft lbs for 6400 & 7200 lbs GVWR or
122 ft lbs for 9900 lbs GVWR or
221 ft lbs for 12300 lbs GVWR.
good luck hope this helps.

Caliper bolt 25 ft lbs/ caliper bracket bolt 79.6 ft lbs

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

It is a T-55 sometimes easy othe time a pain in the ****. You will need to turn the wheel in and throw a bar on it. Now if only I knew the torque specs for the caliper an mounting bracket...