The car has no spark, have replaced the coil and plugs aqnd wires, i think it may be the cam positioning sensor but im not sure.
It is likely either the crank sensor or the ignition module.
It is in the side of the block, toward the rear of the car. From the bottom, look up between the engine and transmission. It has a two wire plug. Wires should be yellow and purple, twisted together. It is kind of hard to remove but it is alot cheaper than the module and is the first place I would start. Also check the module for power and ground. Pink and black wire on the drivers side of the module.
Your welcome. Let me know.
×
532 views
Usually answered in minutes!
thank you, can u tell me where the crank sensor is located i helped do one about five years ago and i cant remeber wheres its at?
Thanks again
×