Question about 2011 Volvo C30
Posted by Anonymous on
front wheel bearing comes as complete hub assembly remove brake calliper and brake disc remove drive shaft nut at the back of hub housing there are some bolts wire brush this area well use penetrating oil remove the bolts tap hub out of housing can be tight so take your time clean housing well then fit new hub secure bolts fit and tourqe up hub drive shaft nut fit disc and calliper
Posted on Nov 23, 2009
It could be drive shaft joint. the car is rear wheel drive with independant suspension. I do not think there is a bearing there. It may also be the brakes need replacing.
Posted on Dec 23, 2009
Make sure the abs sensor is plugged in all the way.. And also make sure that the abs ring.. was not damaged in the process of putting on the new bearing...
Posted on Mar 02, 2010
most front wheel bearings are pressed in you half to take the whole control arm off pull out the hub press out the bearing grease the new one and press it in its best to take it to a machine shop do not try pressing it in yourself
Posted on Mar 09, 2010
Tips for a great answer:
May 02, 2016 | Volvo Cars & Trucks
Feb 17, 2013 | 2007 Volvo S40 1.6
Jun 13, 2012 | Cars & Trucks
Jan 03, 2012 | 2002 Volvo V70
Mar 09, 2010 | 2001 Volvo S40
Mar 02, 2010 | 2006 Volvo S60
Nov 14, 2009 | 1988 Volvo 780
Jul 09, 2009 | 2004 Dodge Ram 2500
Jun 24, 2009 | 1996 Volvo 850
Jul 27, 2012 | 2011 Volvo C30
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: